RE: Web proxy service fails to start
- From: "andy fairley" <andy@xxxxxxxxxxxx>
- To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
- Date: Sun, 23 Dec 2001 15:27:11 -0000
MessageI moved the cache to drive D:. No error in the application log but still
no success in starting the Web Proxy Service.
Andy
----- Original Message -----
From: Mark Strangways
To: [ISAserver.org Discussion List]
Sent: Sunday, December 23, 2001 3:10 PM
Subject: [isalist] RE: Web proxy service fails to start
http://www.ISAserver.org
Disk cache F:\urlcache\dir1.cdat failed to initialize. Some errors were
encountered when ISA Server restored specific data cache files. ISA Server will
now attempt to recover these files. These errors may have occurred because
there was not enough time to complete all necessary shutdown operations, when
ISA Server was previously shut down. To avoid this in future, you can increase
the value of the
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\WaitToKillServiceTimeout
registry key. Identify the reason for cache failure by examining previous
recorded events, or the error code. The error code in the Data area of the
event properties indicates the cause of the failure (internal code:
503.6225.3.0.1200.50). "
This is basically telling you that the drive "F" is having some issues, I
have gotten this error on a drive that was connected to a add-on IDE board. And
yes the drive does have issues :-) but it still works for now, and there isn't
much on it that is REAL important.
As for the other issue, please se my previous post. I belive this will help
you tame the problem.
regards,
Mark S
----- Original Message -----
From: andy fairley
To: [ISAserver.org Discussion List]
Sent: Sunday, December 23, 2001 10:00 AM
Subject: [isalist] RE: Web proxy service fails to start
http://www.ISAserver.org
"The Microsoft Web Proxy service terminated unexpectedly. It has done this
1 time(s). The following corrective action will be taken in 0 milliseconds: No
action."
When I try to start it manually it gives me
"Could not start Microsoft Web Proxy Service on Local Computer. Error 1067:
The process terminated unexpectedly.
Also I've just found this in the application log. = "
Disk cache F:\urlcache\dir1.cdat failed to initialize. Some errors were
encountered when ISA Server restored specific data cache files. ISA Server will
now attempt to recover these files. These errors may have occurred because
there was not enough time to complete all necessary shutdown operations, when
ISA Server was previously shut down. To avoid this in future, you can increase
the value of the
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\WaitToKillServiceTimeout
registry key. Identify the reason for cache failure by examining previous
recorded events, or the error code. The error code in the Data area of the
event properties indicates the cause of the failure (internal code:
503.6225.3.0.1200.50). "
I have tried deleting and replacing the cache which is on an NTFS partition
- 100MB before but this log would suggest that it is a cache problem - any
ideas?
thanks
andy
----- Original Message -----
From: Steve Moffat
To: [ISAserver.org Discussion List]
Sent: Sunday, December 23, 2001 2:30 PM
Subject: [isalist] RE: Web proxy service fails to start
http://www.ISAserver.org
What errors show in your event logs
Steve Moffat
Senior Support Analyst
Optimum Computer Solutions
Tel : +44(0)141 570 1283
Fax :+44(0)141 584 9479
Mobile : 07711 074 605
http://www.optimum.mine.nu
steve@xxxxxxxxxxxxxxx
-----Original Message-----
From: andy fairley [mailto:andy@xxxxxxxxxxxx]
Sent: 23 December 2001 14:26
To: [ISAserver.org Discussion List]
Subject: [isalist] RE: Web proxy service fails to start
http://www.ISAserver.org
I've enabled the DHCP packet filter. The external nic gets its IP address
but the web proxy service still hangs on start up and will not then start.! I
can use email though!
Andy
----- Original Message -----
From: Steve Moffat
To: [ISAserver.org Discussion List]
Sent: Sunday, December 23, 2001 1:24 PM
Subject: [isalist] RE: Web proxy service fails to start
http://www.ISAserver.org
Enable the DHCP Filter in IP Packet filters
Steve
Steve Moffat
Senior Support Analyst
Optimum Computer Solutions
Tel : +44(0)141 570 1283
Fax :+44(0)141 584 9479
Mobile : 07711 074 605
http://www.optimum.mine.nu
steve@xxxxxxxxxxxxxxx
-----Original Message-----
From: andy fairley [mailto:andy@xxxxxxxxxxxx]
Sent: 23 December 2001 10:17
To: [ISAserver.org Discussion List]
Subject: [isalist] Web proxy service fails to start
http://www.ISAserver.org
Hello _ I had a ISA server work fine with a dial up connection but have
now upgraded to a Cable always on modem. I now cannot get ISA to start properly
without the Web proxy service hanging and not being able to be restarted.
I have uninstalled the ISA and rebuilt the server many times but keep
coming back to the same problem. Web Proxy will not start. The external nic
receives its IP address by DHCP and I have experimented with all sorts of
packet filters etc. Whether they are enabled or not the nic seems to get its
address from my ISP. When I study the logs I see that ISA is blocking some more
UDP traffic - could this be the reason why the web proxy service fails or am I
barking up the wrong tree?
Andy Fairley
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
steve@xxxxxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
andy@xxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
steve@xxxxxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
andy@xxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
strangconst@xxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
andy@xxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
Other related posts:
