RE: Web proxy service fails to start
- From: "andy fairley" <andy@xxxxxxxxxxxx>
- To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
- Date: Sun, 23 Dec 2001 14:26:13 -0000
MessageI've enabled the DHCP packet filter. The external nic gets its IP
address but the web proxy service still hangs on start up and will not then
start.! I can use email though!
Andy
----- Original Message -----
From: Steve Moffat
To: [ISAserver.org Discussion List]
Sent: Sunday, December 23, 2001 1:24 PM
Subject: [isalist] RE: Web proxy service fails to start
http://www.ISAserver.org
Enable the DHCP Filter in IP Packet filters
Steve
Steve Moffat
Senior Support Analyst
Optimum Computer Solutions
Tel : +44(0)141 570 1283
Fax :+44(0)141 584 9479
Mobile : 07711 074 605
http://www.optimum.mine.nu
steve@xxxxxxxxxxxxxxx
-----Original Message-----
From: andy fairley [mailto:andy@xxxxxxxxxxxx]
Sent: 23 December 2001 10:17
To: [ISAserver.org Discussion List]
Subject: [isalist] Web proxy service fails to start
http://www.ISAserver.org
Hello _ I had a ISA server work fine with a dial up connection but have
now upgraded to a Cable always on modem. I now cannot get ISA to start properly
without the Web proxy service hanging and not being able to be restarted.
I have uninstalled the ISA and rebuilt the server many times but keep
coming back to the same problem. Web Proxy will not start. The external nic
receives its IP address by DHCP and I have experimented with all sorts of
packet filters etc. Whether they are enabled or not the nic seems to get its
address from my ISP. When I study the logs I see that ISA is blocking some more
UDP traffic - could this be the reason why the web proxy service fails or am I
barking up the wrong tree?
Andy Fairley
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
steve@xxxxxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
andy@xxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
Other related posts:
