RE: VPN digital certificate stopped working

  • From: "Thomas W Shinder" <tshinder@xxxxxxxxxxxxxxxxxx>
  • To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
  • Date: Tue, 18 Feb 2003 20:57:32 -0600

Hi Dan,

Make sure that fragment filtering is disabled on the ISA Server.

HTH,
Tom

Thomas W Shinder
www.isaserver.org/shinder 
ISA Server and Beyond: http://tinyurl.com/1jq1
Configuring ISA Server: http://tinyurl.com/1llp 


-----Original Message-----
From: Dan Bartley [mailto:bartleyd@xxxxxxxxxxxxxxxxxxx] 
Sent: Tuesday, February 18, 2003 1:10 PM
To: [ISAserver.org Discussion List]
Subject: [isalist] VPN digital certificate stopped working


http://www.ISAserver.org


I recently re-installed ISA, in dual mode. On the previous install, also
dual mode, after using the VPN wizard my client VPN to an outside VPN
server worked fine, including with a certificate for authentication.
Since the new install it will only work if a username and password are
specified. The certificate no longer works. It sits at the point of
connecting that the VPN server would normally connect back. Then it
times out as the server did not respond. Turn back on username and
password and it works fine again. The certificate works fine if outside
the ISA server. Any one have any thoughts on what I might have missed
for this? Thanks.

Best Regards,
Dan Bartley



------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist
ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp
ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
Exchange Server Resource Site: http://www.msexchange.org/
Windows Security Resource Site: http://www.windowsecurity.com/
Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
tshinder@xxxxxxxxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')


Other related posts: