Have you tried VNC? Once VNC is installed on the remote system you can view and operate that system as if you were sitting there. You could then open the MMC and set up the VPN. http://www.uk.research.att.com/vnc/ If you're working over a sow connection, try TightVNC: http://www.tightvnc.com/ ----- Original Message ----- From: "Brian Drought" <brian@xxxxxxxxxxxx> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> Sent: Wednesday, April 10, 2002 2:14 PM Subject: [isalist] RE: VPN Wizard? http://www.ISAserver.org It's ISA...soved the problem just now. It only works in MMC on the local machine, not remotely (local machine is miles away ! :-/ ) Bri ----- Original Message ----- From: "Tim Comes" <TComes@xxxxxxxxxxxxxxxxxx> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> Sent: Wednesday, April 10, 2002 7:07 PM Subject: [isalist] RE: VPN Wizard? http://www.ISAserver.org How about when you have Network Configuration selected, can you see it when you click on the action menu? If that does not work try creating a new MMC for ISA and see if you have it then. Is this Enterprise or standard ISA server? -----Original Message----- From: Brian Drought [mailto:brian@xxxxxxxxxxxx] Sent: Wednesday, April 10, 2002 10:36 AM To: [ISAserver.org Discussion List] Subject: [isalist] VPN Wizard? http://www.ISAserver.org >From Tom Shinders page http://www.isaserver.org/shinder/tutorials/configuring_ISA_for_inbound_V PN.h tm ) Running the VPN Client Wizard: To run the VPN client wizard, perform the following steps: 1) Open the ISA Management console. 2) Right click on the Network Configuration node in the left pane, and click the Allow VPN client connections command. Well.......... I would..... but its not there. I have View, Refresh, Export List, Properties and Help. Its an 'integrated' mode ISA server so both proxy and firewall. Win2K SP2 and ISA SP1. Ideas? Thanks, Bri ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: tim@xxxxxxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: brian@xxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: swright@xxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')