Hi Kenneth, steps 6 to 8 is for Time Sync the internal W2K Active Directory Controller with ISA. So, if you don't have such a beast, you can skip those steps. Just keep in mind that any internal device who must Time Sync, must use ISA as time source. Regards, Stefaan -----Original Message----- From: Kenneth Schild [mailto:kschild@xxxxxxxxxxx] Sent: woensdag 13 maart 2002 21:36 To: [ISAserver.org Discussion List] Subject: [isalist] RE: Time Sync http://www.ISAserver.org I did as the txt file said but I'm not sure I did exactly what I was told to do. Starting a line 6. what is At the AD, mean? And 7. add the Log registry value to the AD in the same place as in the ISA? Thanks for all your time Ken -----Original Message----- From: Stefaan Pouseele [mailto:stefaan.pouseele@xxxxxxx] Sent: Tuesday, March 12, 2002 1:18 PM To: [ISAserver.org Discussion List] Subject: [isalist] RE: Time Sync http://www.ISAserver.org Hi John, to 'import' the W32time.reg file just double click on it ;-) Regards, Stefaan -----Original Message----- From: John Tolmachoff [mailto:jtolmachoff@xxxxxxxxxxxxxxxx] Sent: dinsdag 12 maart 2002 22:02 To: [ISAserver.org Discussion List] Subject: [isalist] RE: Time Sync http://www.ISAserver.org Do you just import the file using what, regedit or regedt32? John Tolmachoff IT Manager, Network Engineer 211 E. Imperial Hwy., Suite 106 Fullerton, CA 92835 714-578-7999, ext. 104 jtolmachoff@xxxxxxxxxxxxxxxx www.reliancesoft.com -----Original Message----- From: Stefaan Pouseele [mailto:stefaan.pouseele@xxxxxxx] Sent: Tuesday, March 12, 2002 12:51 PM To: [ISAserver.org Discussion List] Subject: [isalist] RE: Time Sync http://www.ISAserver.org Hi Ken, the most elegant solution is to make ISA your timeserver for the whole internal network. I suggest you look at ftp://ftp.tacteam.net/isaserver/nettime.zip . All documentation is included. Regards, Stefaan -----Original Message----- From: Kenneth Schild [mailto:kschild@xxxxxxxxxxx] Sent: dinsdag 12 maart 2002 21:12 To: [ISAserver.org Discussion List] Subject: [isalist] Time Sync http://www.ISAserver.org I'm getting a errorin the event log the i can not time sync. Before i installed ISA time sync worked. I have a protocol rule the is set for all open and a packet filter all open and i can not sync. any help would be apricated. Ken ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: stefaan.pouseele@xxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: jtolmachoff@xxxxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: stefaan.pouseele@xxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: kschild@xxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: stefaan.pouseele@xxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')