Re: Service initialization failure ?
- From: "Jim Harrison" <jim@xxxxxxxxxxxx>
- To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
- Date: Wed, 17 Jul 2002 09:57:09 -0700
Inline...
Jim Harrison
MCP(NT4, W2K), A+, Network+, PCG
http://isaserver.org/authors/harrison/
Read the books!
----- Original Message -----
From: "Jeff Slonaker" <jeff.slonaker@xxxxxxxx>
To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
Sent: Tuesday, July 16, 2002 11:41 AM
Subject: [isalist] Service initialization failure ?
http://www.ISAserver.org
All:
I have configured IE to connect to 8080 on the ISA Server host.
The ISA Server host is internally configured to pass Web traffic to
a Web filter. The Web filter then checks the URL and passes back
a Yea or Nay to ISA.
** what web filter?
What happens is:
If the site should be blocked, e.g. www.whitehouse.com, the user gets a
blocked screen as designed.
If the site should not be blocked, e.g. www.google.com, the user gets an
HTTTP 404, "The Page cannot be found."
Furthermore, the URL in the address box now reads "www.www.google.com.com".
This URL is also in the body
** That's IE trying to perform its default search technique; prepending www.
and appending .com
of the error page. Logs from the web filter show that:
ISA passes www.google.com to the web filter which returns "Category Not
Blocked"
ISA passes the msn search page to the web filter which again returns
"Category Not Blocked".
When I look at Alerts in ISA Management, I see
Service started and seconds later
Service initialization failure.
The Services window shows that "Microsoft ISA Server Control" is Started.
If I bounce ISA Control:
ISA Management, Alerts, shows "Service started" , i.e.--no Service
initialization failure, but
I get an IE "Cannot find server or DNS error" for any site that I try to
access.
Also, if I reset Lan Settings to port 80 on the default gateway, IE works
fine.
TIA.
Jeff Slonaker
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
jim@xxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
Other related posts:
