RE: SecuRemote and ISA

  • From: "Thomas W Shinder" <tshinder@xxxxxxxxxxxxxxxxxx>
  • To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
  • Date: Wed, 7 May 2003 20:24:38 -0500

Hi Anthony,
 
Have you checked the FAQ at www.isaserver.org?
 
Thanks!
Tom
Thomas W Shinder 
www.isaserver.org/shinder 
ISA Server and Beyond: http://tinyurl.com/1jq1 
Configuring ISA Server: http://tinyurl.com/1llp 
        -----Original Message-----
        From: Anthony Sullivan
[mailto:anthony@xxxxxxxxxxxxxxxxxxxxxxxxx] 
        Sent: Wednesday, May 07, 2003 4:39 AM
        To: [ISAserver.org Discussion List]
        Subject: [isalist] SecuRemote and ISA
        
        
        ----------ISAserver.org
        
        
        List,
         
        Forgive me if this is old ground, but I have been through the
archives and found no definitive answer.
         
        I'm trying to access a Checkpoint FW1 with Checkpoint VPN-1
SecuRemote 4.1 SP5 (Build 4199) through ISA Server.
         
        I have setup Protocol Definitions for TCP 264, UDP and TCP 500,
TCP 259, UDP 2746 and associated rules with no luck. I have tried to use
the firewall client again no luck.
         
        Will the SecuRemote work through ISA? If so how is this
accomplished?
         
         
        Anthony Sullivan
         
        ------------------------------------------------------
        List Archives:
http://www.webelists.com/cgi/lyris.pl?enter=isalist
        ISA Server Newsletter:
http://www.isaserver.org/pages/newsletter.asp
        ISA Server FAQ:
http://www.isaserver.org/pages/larticle.asp?type=FAQ
        ------------------------------------------------------
        Exchange Server Resource Site: http://www.msexchange.org/
        Windows Security Resource Site: http://www.windowsecurity.com/
        Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
        ------------------------------------------------------
        You are currently subscribed to this ISAserver.org Discussion
List as: tshinder@xxxxxxxxxxxxxxxxxx
        To unsubscribe send a blank email to
$subst('Email.Unsub') 

Other related posts: