Routing
- From: "Stephen Herrera" <sherrera@xxxxxxxxxx>
- To: "[ISAserver.org Discussion List] \(E-mail\)" <isalist@xxxxxxxxxxxxx>
- Date: Fri, 9 May 2003 10:35:44 -0700
Hello All,
I have a situation that I need some help with routing. I have setup a VPN
tunnel using Sonicwall devices between my west coast office and our
corporate east coast office. They use Sonicwall as their firewall solution
and we have a Back to Back ISA Server solution.
At my location we have a Sonicwall sitting on the network in 1 arm Mode and
the tunnel has been established between the 2 Sonicwall devices thru the ISA
servers. What I need to know is how can I route packets destined for the
east coast 192.168.1.x 255.255.255.0 from the west coast 10.10.0.x
255.255.0.0 to go to the Sonicwall device before they go out.
On my inside ISA Server I have set up a route on RRAS that has a gateway of
10.10.0.2 (which is the Sonicwall device no my network) for a destination of
their network. I see the route added when I do a route print but I cannot
ping to the other side and a tracert does not show the packets trying to
make any hops. Any help is appreciated. Thanks in advance.
Steve
Other related posts:
