I also have an ISA server with Radius on it (No E2K though) I created two packet filters. One as Radius accounting and one Radius Authentication. For accounting, I created a UDP filter with receive send direction, local port is fixed with 1813 as port number, Remote port are all ports. The same thing for authentication only using port 1812. The local computer tab is the external interface that the NAS is pointing at and the Remote computer is the NAS ip address. It works perfect for me. Tom ----- Original Message ----- From: arifoff To: [ISAserver.org Discussion List] Sent: Saturday, April 20, 2002 12:43 AM Subject: [isalist] Radius http://www.ISAserver.org Hi All I have ISA server running with E2K on same machine. Both are working fine. I have now configured Radius server on the same machine. My NAS will authenticate through this Radius. Some how it is not. Can any body could point out issues involve in Radius server with ISA Server. What i could think of is ports setting. Give comments regards arif ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: tomerm1@xxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')