[isalist] RPC Documentation -
- From: "ISA" <ISA@xxxxxxxxxxxxxxxx>
- To: <isalist@xxxxxxxxxxxxx>
- Date: Fri, 11 Aug 2006 18:18:36 -0400
http://www.ISAserver.org
-------------------------------------------------------
Understood!
However, tracking down the article which addresses ISA 2004 and Outlook
2003 given a step-by-step How To has shown to be difficult to
find....for me anyway.
Any help would be greatly appreciated.
Joseph Danielsen, MCSA-Messaging, MCP
Network Blade Inc.
49 Marcy Street
Somerset, NJ 08873
732-213-0600
www.networkblade.com
-----Original Message-----
From: isalist-bounce@xxxxxxxxxxxxx [mailto:isalist-bounce@xxxxxxxxxxxxx]
On Behalf Of Jim Harrison
Posted At: Friday, August 11, 2006 4:45 PM
Posted To: ISA
Conversation: [isalist] RPC Documentation -
Subject: [isalist] Re: RPC Documentation -
http://www.ISAserver.org
-------------------------------------------------------
Er..
Who do you think writes much of them?
-------------------------------------------------------
Jim Harrison
MCP(NT4, W2K), A+, Network+, PCG
http://isaserver.org/Jim_Harrison/
http://isatools.org
Read the help / books / articles!
-------------------------------------------------------
-----Original Message-----
From: isalist-bounce@xxxxxxxxxxxxx [mailto:isalist-bounce@xxxxxxxxxxxxx]
On Behalf Of ISA
Sent: Friday, August 11, 2006 12:39
To: isalist@xxxxxxxxxxxxx
Subject: [isalist] RPC Documentation -
Tom: I was hoping for one of your articles.....
I have become accustomed to reading the shinderistic way of things :-)
Joseph Danielsen, MCSA-Messaging, MCP
Network Blade Inc.
49 Marcy Street
Somerset, NJ 08873
732-213-0600
www.networkblade.com <http://www.networkblade.com/>
________________________________
From: isalist-bounce@xxxxxxxxxxxxx [mailto:isalist-bounce@xxxxxxxxxxxxx]
On Behalf Of Thomas W Shinder Posted At: Friday, August 11, 2006 12:42
PM Posted To: ISA
Conversation: [isalist] RPC Documentation -
Subject: [isalist] Re: RPC Documentation -
Hi Joseph,
Here:
http://www.microsoft.com/technet/prodtechnol/isa/2004/deployment/default
.mspx
HTH,
Tom
Thomas W Shinder, M.D.
Site: www.isaserver.org <http://www.isaserver.org/>
Blog: http://blogs.isaserver.org/shinder/
Book: http://tinyurl.com/3xqb7
MVP -- ISA Firewalls
________________________________
From: isalist-bounce@xxxxxxxxxxxxx
[mailto:isalist-bounce@xxxxxxxxxxxxx] On Behalf Of ISA
Sent: Friday, August 11, 2006 11:37 AM
To: isalist@xxxxxxxxxxxxx
Subject: [isalist] RPC Documentation -
Tom:
Where is the ISA 2004 version of this article?
Publishing RPC over HTTP by Placing the RPC/HTTP Proxy on the
ISA Server 2000 Firewall
http://www.isaserver.org/articles/isarpchttpproxy1.html
Joseph Danielsen, MCSA-Messaging, MCP
Network Blade Inc.
49 Marcy Street
Somerset, NJ 08873
732-213-0600
www.networkblade.com <http://www.networkblade.com/>
________________________________
From: isalist-bounce@xxxxxxxxxxxxx
[mailto:isalist-bounce@xxxxxxxxxxxxx] On Behalf Of Thomas W Shinder
Posted At: Friday, August 11, 2006 11:59 AM
Posted To: ISA
Conversation: [isalist] ISA Mistake or Exchange documentation
???
Subject: [isalist] Re: ISA Mistake or Exchange documentation ???
Hi Joseph,
Yes, I should have included that stuff for change password,
although it is included in some of my ISA 2000 stuff, but that's no
excuse.
Good news is that change password functionality (and password
expiration warnings) are integrated into the ISA 2006 FBA ;)
Tom
Thomas W Shinder, M.D.
Site: www.isaserver.org <http://www.isaserver.org/>
Blog: http://blogs.isaserver.org/shinder/
Book: http://tinyurl.com/3xqb7
MVP -- ISA Firewalls
________________________________
From: isalist-bounce@xxxxxxxxxxxxx
[mailto:isalist-bounce@xxxxxxxxxxxxx] On Behalf Of ISA
Sent: Friday, August 11, 2006 10:04 AM
To: isalist@xxxxxxxxxxxxx
Subject: [isalist] ISA Mistake or Exchange documentation
???
I'm not sure who to blame (starting with myself), but I
ran into a few interesting series of road bumps that could have been
avoided with better/different documentation.
Steps:
1) Publish Exchange - done!
2) Publish OWA - done!
3) Publish OWA via Https - done!
4) Publish FBA - done!
5) Publish RPC/http - done!
6) Then I tried to get the "Change Password" option to
work via OWA. Simply received a 403 error URL not allowed.
After spending unsuccessful hours searching for
documentation - I stumbled upon the answer myself.
My point is, is that it seems more logical that when
documenting the procedures for Step 2 or Step 3 above they could have
simply listed the minimum required PATH directories AND then added a
suggestion of (additional) PATH directories that might be needed in the
future i.e. IISADMPWD, OMA, RPC etc.
Joseph Danielsen, MCSA-Messaging, MCP
Network Blade Inc.
49 Marcy Street
Somerset, NJ 08873
732-213-0600
All mail to and from this domain is GFI-scanned.
------------------------------------------------------
List Archives: //www.freelists.org/archives/isalist/
ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp
ISA Server Articles and Tutorials:
http://www.isaserver.org/articles_tutorials/
ISA Server Blogs: http://blogs.isaserver.org/
------------------------------------------------------
Visit TechGenix.com for more information about our other sites:
http://www.techgenix.com
------------------------------------------------------
To unsubscribe visit http://www.isaserver.org/pages/isalist.asp
Report abuse to listadmin@xxxxxxxxxxxxx
------------------------------------------------------
List Archives: //www.freelists.org/archives/isalist/
ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp
ISA Server Articles and Tutorials: http://www.isaserver.org/articles_tutorials/
ISA Server Blogs: http://blogs.isaserver.org/
------------------------------------------------------
Visit TechGenix.com for more information about our other sites:
http://www.techgenix.com
------------------------------------------------------
To unsubscribe visit http://www.isaserver.org/pages/isalist.asp
Report abuse to listadmin@xxxxxxxxxxxxx
Other related posts:
