RES: Re: Server Publish Fail
- From: "Rafael Rodrigues" <rafael.rodrigues@xxxxxxxxxxxxx>
- To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
- Date: Fri, 3 Oct 2003 12:11:10 -0300
And where i can get this fix? I need contat MS Professional Support, and i need
wait about 1 or 2 days to sent the fix. Do you have or do you know where i can
get?
Very very thanks Tom and Jim!
Rafael Rodrigues.
-----Mensagem original-----
De: Thomas W Shinder [mailto:tshinder@xxxxxxxxxxxxxxxxxx]
Enviada em: sexta-feira, 3 de outubro de 2003 11:50
Para: [ISAserver.org Discussion List]
Assunto: [isalist] RE: RES: RE: RES: RES: Re: Server Publish Fail
http://www.ISAserver.org
Hi Rafael,
Make sure you're not using a terminal services session on Host A while
you're testing your Server Publishing Rule. Also, get the latest roll up
hotfix, it's a miracle drug for DNS publishing.
HTH,
Tom
Thomas W Shinder
www.isaserver.org/shinder
ISA Server and Beyond: http://tinyurl.com/1jq1
Configuring ISA Server: http://tinyurl.com/1llp
-----Original Message-----
From: Rafael Rodrigues [mailto:rafael.rodrigues@xxxxxxxxxxxxx]
Sent: Friday, October 03, 2003 9:34 AM
To: [ISAserver.org Discussion List]
Subject: [isalist] RES: RE: RES: RES: Re: Server Publish Fail
http://www.ISAserver.org
I had installed SP1 and FP1 too!!
Thanks!
-----Mensagem original-----
De: Thomas W Shinder [mailto:tshinder@xxxxxxxxxxxxxxxxxx]
Enviada em: sexta-feira, 3 de outubro de 2003 11:30
Para: [ISAserver.org Discussion List]
Assunto: [isalist] RE: RES: RES: Re: Server Publish Fail
http://www.ISAserver.org
Hi Rafael,
I fogot about that one. It might have been fixed with Feature Pack 1,
but I'll have to check the FP1 specs to be sure.
HTH,
Tom
Thomas W Shinder
www.isaserver.org/shinder
ISA Server and Beyond: http://tinyurl.com/1jq1
Configuring ISA Server: http://tinyurl.com/1llp
-----Original Message-----
From: Rafael Rodrigues [mailto:rafael.rodrigues@xxxxxxxxxxxxx]
Sent: Friday, October 03, 2003 9:25 AM
To: [ISAserver.org Discussion List]
Subject: [isalist] RES: RES: Re: Server Publish Fail
http://www.ISAserver.org
Hi Jim... Look this article from KB:
http://support.microsoft.com/default.aspx?scid=kb;en-us;319377&Product=I
SAS
I'm thinking this is my problem.
Do you sugest anyting?
Thanks a lot!!!!
Rafael Rodrigues.
-----Mensagem original-----
De: Rafael Rodrigues
Enviada em: sexta-feira, 3 de outubro de 2003 10:19
Para: [ISAserver.org Discussion List]
Assunto: [isalist] RES: Re: Server Publish Fail
http://www.ISAserver.org
Hi Jim! Thanks for the help.
Look the schema of my test:
host a <---> internet <---> router <---> ISA <---> Internal Network
I have a TS at host a.
My ISA respond from all valid ip from my /28 class C subnet from network
card (a).
My ISA respond from ip 10.11.0.26/22.
I have a Exchange Server with ip 10.11.0.21/22
In host a, via TS, i execute telnet 200.190.x.x 25 (i use server publish
rule) and from host a the telnet respond:
Connection to host lost.
I'm trying to publish a DNS Server and SMTP Server.
I don't know what's happing. I have the same configuration in another
company and it's works fine!
Thanks again Jim!
Rafael Rodrigues.
-----Mensagem original-----
De: Jim Harrison [mailto:jim@xxxxxxxxxxxx]
Enviada em: sexta-feira, 3 de outubro de 2003 09:54
Para: [ISAserver.org Discussion List]
Assunto: [isalist] Re: Server Publish Fail
http://www.ISAserver.org
Where are you testing this fron:
1 - behind ISA on the SMTP server
2 - behind ISA on a separate host
3 - outside ISA on a separate host
?
Options 1 and 2 are non-functional.
Jim Harrison
MCP(NT4, W2K), A+, Network+, PCG
http://isaserver.org/Jim_Harrison/
http://isatools.org
Read the help / books / articles!
On Fri, 3 Oct 2003 09:32:47 -0300
"Rafael Rodrigues" <rafael.rodrigues@xxxxxxxxxxxxx> wrote:
http://www.ISAserver.org
Does n1 have any sugestions?
Thanks!
-----Mensagem original-----
De: Rafael Rodrigues
Enviada em: quinta-feira, 2 de outubro de 2003 21:37
Para: [ISAserver.org Discussion List]
Assunto: [isalist] Server Publish Fail
http://www.ISAserver.org
I'm having a big problem! I have a new ISA Server with 2 network
cards: (a) have public IP (all ips from /28 class C), (b) have
10.11.0.26.
My default gateway from (a) use as default GW my router. The router
and ISA as connected with a cross-cable. The DNS from (a) as designed
from my ISP. At network (b), i dont have default GW and the DNS Servers
are my DCs.
Wen i publish a SMTP Server, i select 1 valid IP and select my
internal Exchange Server. After it, from the internet, wen i make a
telnet on port 25 to that valid ip, i dont receive any message from
Exchange Server. From the ISA Machine, i make a telnet to internal
address (10.x) and it works fine!
Does n1 know what is happing?
Thanks!!!
Rafael Rodrigues.
Other related posts:
