Re: RES: Re: RES: SMTP Traffic
- From: "Scott Force" <sforce01@xxxxxxxxx>
- To: isalist@xxxxxxxxxxxxx
- Date: Mon, 4 Nov 2002 09:14:05 -0700
Alex,
Thanks a bunch. I had completed all the processes except allowing the
SMTP protocol to the Exchange server. It's working now, thanks again!
> there's another detail: DNS=20
>
> Make sure that your internall dns server can resolve external queries.
> And Your External DNS points the MX record to ISA Server External card.
>
> Alex D.
>
> -----Mensagem original-----
> De: Scott Force [mailto:sforce01@xxxxxxxxx]
> Enviada em: segunda-feira, 4 de novembro de 2002 13:50
> Para: [ISAserver.org Discussion List]
> Assunto: [isalist] Re: RES: SMTP Traffic
>
>
> http://www.ISAserver.org
>
>
> Alex,
> thanks, I'll give it a shot. =20
>
>
>
> > first:
> >=20
> > 1. Appoint the Defaut gateway of Exchange to ISA Server machine.
> > 2. Create manually (or use the wizard) the rules that allow smtp =3D
> > (inbound and Outbound) to exchange address internally in=3D20
> > server publish.
> > 3. Create manually( or use the wizard) to create the protocol rule =3D
> > allowing smtp protocol to Exchange Server.
> > 4. Stop and Start ISA Services
> > 5. go to Exchange Server , telnet <mail.anydomain.com> 25, see the =
> smtp =3D
> > session on target.
> >=20
> > Hope this Help,
> > Alex D.
> >=20
> > -----Mensagem original-----
> > De: Scott Force [mailto:sforce01@xxxxxxxxx]
> > Enviada em: segunda-feira, 4 de novembro de 2002 13:36
> > Para: [ISAserver.org Discussion List]
> > Assunto: [isalist] SMTP Traffic
> >=20
> >=20
> > http://www.ISAserver.org
> >=20
> >=20
> > Good Morning,
> > I am running ISA Standard Edition on Win2000 Serv. I am having
> > problems sending and receiving smtp e-mail through the ISA server. I =
> =3D
> > have
> > correctly configured web and other protocol access but mail is not =3D
> > working
> > correctly. I am running Exchange 5.5 and at one point was able to =
> send
> > e-mail out but not receive e-mail. Through all the changes I've made =
> I =3D
> > am
> > now unable to do that. Can someone point me to an article or =
> enlighten =3D
> > me
> > on what has to be setup in order to send and receive smtp messages
> > properly? I'm new to ISA and I have read about a thousand articles =
> and =3D
> > I
> > think I'm missing the obvious. Thanks in advance, Scott.
> >=20
> > ------------------------------------------------------
> > List Archives: http://www.webelists.com/cgi/lyris.pl?enter=3D3Disalist
> > ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp
> > ISA Server FAQ: =
> http://www.isaserver.org/pages/larticle.asp?type=3D3DFAQ
> > ------------------------------------------------------
> > Exchange Server Resource Site: http://www.msexchange.org/
> > Windows Security Resource Site: http://www.windowsecurity.com/
> > Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
> > ------------------------------------------------------
> > You are currently subscribed to this ISAserver.org Discussion List as: =
> =3D
> > alex@xxxxxxxxxxxxx
> > To unsubscribe send a blank email to =3D
> > $subst('Email.Unsub')
>
> ------------------------------------------------------
> List Archives: http://www.webelists.com/cgi/lyris.pl?enter=3Disalist
> ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp
> ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=3DFAQ
> ------------------------------------------------------
> Exchange Server Resource Site: http://www.msexchange.org/
> Windows Security Resource Site: http://www.windowsecurity.com/
> Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
> ------------------------------------------------------
> You are currently subscribed to this ISAserver.org Discussion List as: =
> alex@xxxxxxxxxxxxx
> To unsubscribe send a blank email to =
> $subst('Email.Unsub')
Other related posts:
