RES: RE: Kazaa Lite & ISA

From: "Tiago de Aviz" <Tiago@xxxxxxxxxxxxxxx>
To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
Date: Wed, 11 Jun 2003 10:00:37 -0300
Nah, just change the local port to dynamic, this should get you through.
The FW client is not supported on the ISA server itself.

Tiago de Aviz
IT Consultant
MCP-CNA-AIX-CCNA-CCDA
--------------------------------
www.softsell.com.br
tiago@xxxxxxxxxxxxxxx
--------------------------------

-----Mensagem original-----
De: Mark Strangways [mailto:strangconst@xxxxxxxxxx] 
Enviada em: quarta-feira, 11 de junho de 2003 08:58
Para: [ISAserver.org Discussion List]
Assunto: [isalist] RE: Kazaa Lite & ISA

http://www.ISAserver.org


You need to tie it somehow to port 80.
I found that it initially connects thru port 80 then establishes
communications thru a random port from 1214 up thru 10000 I believe.
And the FW client needs to be installed and active, so I am not sure
that
you could actually use it on the ISA machine.

Good luck !
Mark S
----- Original Message ----- 
From: "Liam Farr" <liam@xxxxxxxxxxx>
To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
Sent: Wednesday, June 11, 2003 12:30 AM
Subject: [isalist] RE: Kazaa Lite & ISA


> http://www.ISAserver.org
>
>
> Ok,
>
> I created the filter as follows;
>
> Filter Type > Custom
> >> IP Protocol > TCP
> >> Direction > Both
> >> Local Port > Fixed Port
> >> Port Number > 1214
> >>Remote port > Fixed Port
> >>Port Number > 1214
>
> Local Computer
> >>This filter applies to > Default Ip Address on the External
Interface
>
> Remote Computer
> >>All remote Computers
>
> Then I restarted the Firewall and Proxy service, however I still can't
> get kazaa to connect, any ideas?
>
>
> Cheers
>
> Liam
> > http://www.ISAserver.org
> >
> >
> > Aside from the obvious 'why would you run a security risk program on
your
> > firewall server ? ' questions ... you need to use packet filters and
not
> > protocol rules on the actual server itself.
> >
> > Paul Nuernberger
> >
> > -----Original Message-----
> > From: Liam Farr [mailto:liam@xxxxxxxxxxx]
> > Sent: Tuesday, June 10, 2003 4:56 PM
> > To: [ISAserver.org Discussion List]
> > Subject: [isalist] Kazaa Lite & ISA
> >
> >
> > http://www.ISAserver.org
> >
> >
> > Hi,
> >
> > Im trying to get Kazaa Lite to work on my server box, I've added in
the
> > correct port (1214) for inbound and outbound traffic under protocol
> > definitions, and set the protocol rules for the server box to allow
all
> > IP traffic, but still no luck?!
> >
> > Any Ideas?
> >
> >
> > Cheers
> >
> > Liam
> >
> > ------------------------------------------------------
> > List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist
> > ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp
> > ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ
> > ------------------------------------------------------
> > Other Internet Software Marketing Sites:
> > Leading Network Software Directory: http://www.serverfiles.com
> > No.1 Exchange Server Resource Site: http://www.msexchange.org
> > Windows Security Resource Site: http://www.windowsecurity.com/
> > Network Security Library: http://www.secinf.net/
> > Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
> > ------------------------------------------------------
> > You are currently subscribed to this ISAserver.org Discussion List
as:
> > pen@xxxxxxxxx
> > To unsubscribe send a blank email to
$subst('Email.Unsub')
> >
> >
> > ------------------------------------------------------
> > List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist
> > ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp
> > ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ
> > ------------------------------------------------------
> > Other Internet Software Marketing Sites:
> > Leading Network Software Directory: http://www.serverfiles.com
> > No.1 Exchange Server Resource Site: http://www.msexchange.org
> > Windows Security Resource Site: http://www.windowsecurity.com/
> > Network Security Library: http://www.secinf.net/
> > Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
> > ------------------------------------------------------
> > You are currently subscribed to this ISAserver.org Discussion List
as:
> liam@xxxxxxxxxxx
> > To unsubscribe send a blank email to
$subst('Email.Unsub')
> >
> >
>
> -- 
>
>
> ------------------------------------------------------
> List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist
> ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp
> ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ
> ------------------------------------------------------
> Other Internet Software Marketing Sites:
> Leading Network Software Directory: http://www.serverfiles.com
> No.1 Exchange Server Resource Site: http://www.msexchange.org
> Windows Security Resource Site: http://www.windowsecurity.com/
> Network Security Library: http://www.secinf.net/
> Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
> ------------------------------------------------------
> You are currently subscribed to this ISAserver.org Discussion List as:
strangconst@xxxxxxxxxx
> To unsubscribe send a blank email to
$subst('Email.Unsub')


------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist
ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp
ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
Other Internet Software Marketing Sites:
Leading Network Software Directory: http://www.serverfiles.com
No.1 Exchange Server Resource Site: http://www.msexchange.org
Windows Security Resource Site: http://www.windowsecurity.com/
Network Security Library: http://www.secinf.net/
Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
tiago@xxxxxxxxxxxxxxx
To unsubscribe send a blank email to
$subst('Email.Unsub')
RES: RE: Kazaa Lite & ISA

Other related posts:
