Hi Lambert, Your English is a lot better than my French! :-) I figured that it would work similarly to how it works when the VPN client connects directly to the ISA Server. I haven't worked with the Firewall Client on a RAS client connected to another RRAS server on the same network as the ISA Server. Its an interesting question that I'll have to investigate in the future. Thanks! Tom Thomas W Shinder www.isaserver.org/shinder -----Original Message----- From: Lambert A. LOMBE [mailto:lombe@xxxxxxxxxxxxxxxxxxx] Sent: Tuesday, August 20, 2002 10:23 AM To: [ISAserver.org Discussion List] Subject: [isalist] RE : RE: Net2Phone and ISA http://www.ISAserver.org Hi Tom, Excuse me for my poor English, I'm French speaking. On the computers of my local network with the firewall client installed, Net2Phone function normally without any modification in the protocols rules shipped with ISA. I've tried by installing the firewall client on the RRAS computers which are configure to use the IP of the ISA server as gateway. When dialling up on these computers, Net2Phone can't function and under the ISA MMC, the session users is anonymous which means that the user is not authenticated and I think that the firewall client installed on the RRAS computer can't do it's job in that case. I want to know if I can copy the content of the share directory mspclnt of the ISA computer and install the firewall client from it on the computer used for dialup? >--------------------------- Lambert A. LOMBE -----Message d'origine----- De : Thomas W. Shinder [mailto:tshinder@xxxxxxxxxxxxxxxxxx] Envoyé : mardi 20 août 2002 15:29 À : [ISAserver.org Discussion List] Objet : [isalist] RE: Net2Phone and ISA http://www.ISAserver.org Hi Lambert, Make sure the RAS client is a Firewall client too and that there is an all open Protocol Rule for access (unless you've been able to figure out what the precise protocols are required for Net2phone to work). HTH, Tom Thomas W Shinder <http://www.isaserver.org/shinder> www.isaserver.org/shinder -----Original Message----- From: Lambert A. LOMBE [mailto:lombe@xxxxxxxxxxxxxxxxxxx] Sent: Tuesday, August 20, 2002 8:44 AM To: [ISAserver.org Discussion List] Subject: [isalist] Net2Phone and ISA http://www.ISAserver.org Hi Please help me. I've got and read the entire Tom's book (Configuring ISA Server 200) and still can't find how to allow my RAS client on other RRAS computer to make call through ISA. ---------------------------------------- Lambert A. LOMBE Gpe ACERFI-MICRONICS ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: tshinder@xxxxxxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: lombe@xxxxxxxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: tshinder@xxxxxxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')