http://www.ISAserver.org Hi Badri, Remove all addresses not on the internal network from the LAT. HTH, Tom Thomas W Shinder www.isaserver.org/shinder ISA Server and Beyond: http://tinyurl.com/1jq1 Configuring ISA Server: http://tinyurl.com/1llp -----Original Message----- From: Badri Khanal [mailto:badri.khanal@xxxxxxxxxx] Sent: Wednesday, April 02, 2003 3:55 AM To: [ISAserver.org Discussion List] Subject: [isalist] Publishing servers http://www.ISAserver.org http://www.ISAserver.org Hi, I have installed ISA server which is behind the router. NAT is performed by the router itself. I have installed 2 NIC cards in the ISA server, one facing the LAN and another facing the router. Both cards are configured with private IP address. There is a web server and exchange server behind the firewall and people need to access them from outside world. For this, I tried to configure server publishing rules but when I do that, I get an error message which says "The IP address specified is not external" and I get nowhere. If anyone of you have experienced similar problem or if you know the logic behind this, please help me. Thank you, --------------------------- Badri Khanal Systems Administrator United Mission to Nepal Post Box 126 Kathmandu, Nepal Tel: 977-1-4268900, 4228118 Fax: 977-1-4225559 Free Trial Software: Monitor & Manage Web Use with SurfControl Web Filter for MS ISA Server http://www.surfcontrol.com/go/zisadl1 ------------------------------------------------------ List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ ------------------------------------------------------ Exchange Server Resource Site: http://www.msexchange.org/ Windows Security Resource Site: http://www.windowsecurity.com/ Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: david.rutter@xxxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')