Hello! Did anyone succeeded in publishing an internal syslog server through ISA? Here's what I did: 1. Create a new Protocol Definition for UDP port 514, direction: Receive. No secondary connection. 2. Create a Server Publishing Rule for the above created server protocol, with the internal IP of the syslog server and the external IP of the ISA server. 3. Reboot ISA. In Monitoring/Sessions the firewall session to the syslog server is listed. But, the messages sent to the syslog server do not reach the server!!! TIA ---------------------------------------------------------------- Mihnea Mironescu IT Manager Papastratos Romania SRL MihneaM@xxxxxxxxxxxxxx Tel.: +40-1-221-9175 Fax: +40-1-430-4091 ---------------------------------------------------------------- ---------------------------------------------------------------------------- This email and any attached files are confidential and may be legally privileged. If you are not the addressee, any disclosure, reproduction, copying, distribution, or use of this communication is strictly prohibited. If you have received this transmission in error please notify the sender immediately and then delete this email from your system. Email transmission cannot be guaranteed to be secure or error free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses and therefore Papastratos Romania SRL does not accept legal responsibility for any errors or omissions in the contents of this message which arise as a result of email transmission. If verification is required please request a hard copy version. ----------------------------------------------------------------------------