RE: Publishing Exchange Server - Weird Problem
- From: "Muqeem Syed" <Syed.Muqeem@xxxxxxxxxxxx>
- To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
- Date: Thu, 29 Nov 2001 17:53:55 +0200
the outgoing connection form the server is made to a random port on the
client side.. check to see if you have any outgoing protocol rule that
denies outgoing traffice on certain ports.. .. the incoming traffic to
the server is on port 25 but outgoing port could be any random port..
you might want to check if there is any outgoing protol rule that
defines to deny traffic on those ports.
-----Original Message-----
From: Dave Morrow [mailto:David.Morrow@xxxxxxxxxxxx]
Sent: Thursday, November 29, 2001 4:40 PM
To: [ISAserver.org Discussion List]
Subject: [isalist] Publishing Exchange Server - Weird Problem
http://www.ISAserver.org
I have this very strange problem with publishing an Exchange server
behind
ISAServer.
I use the "Secure Mail Server" publishing wizard to publish my Exchange
server. Everything works fine with respect to POP/SMTP but Outlook
clients
connecting to my server can only resolve their mailbox name (when they
setup
their profile). When they launch Outlook it fails to connect to the
server.
I know it can connect since it properly resolves the name and sets up
the
profile.
David A. Morrow
Network Administrator
Autodata Solutions Company
David.Morrow@xxxxxxxxxxxx
http://www.autodata.net <http://www.autodata.net>
Phone: (519) 951-6067 Fax: (519) 451-6615
This message has originated from Autodata Solutions Company. The
attached
material is the Confidential and proprietary Information of Autodata
Solutions Company. This email and any files transmitted with it are
confidential and intended solely for the use of the individual or entity
to
whom they are addressed. If you have received this email in error please
delete this message and notify the Autodata system administrator at
ADMINISTRATOR@xxxxxxxxxxxx
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
syed.muqeem@xxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
Other related posts:
