Does the LAT on the ISA server include the range of the internal Exchange server? ----- Original Message ----- From: Peter Forster To: [ISAserver.org Discussion List] Sent: Friday, October 11, 2002 10:41 AM Subject: [isalist] Publish Problem http://www.ISAserver.org Hi all, I am still stuck with a publish problem. I have attempted to run Secure Mail server on the perimeter ISA box, it finds the external ip addr OK but when I do browse to find the internal ip of the exchange server it only finds the name of the computer. When I click the Find button to associate the name of the computer to an Ip addr I get an error message stating it cannot find the Ip of that sever. So I proceed with manually entering the Ip of the exchange server the wizard finishes and closes. When I check the publish to server Rules, it shows the rules that were published pointing to the outside/external ip addr, this seems incorrect. I would suspect they need to point to the internal exch server. If anyone has some trouble shooting tips on configuring and publish to a mail server that would be greatly appreciated. I used the baseline instructions from books and tutorials but can't seem to find a checklist or trouble shooting guide. Thanks for your help Peter ------------------------------------------------------ List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ ------------------------------------------------------ Exchange Server Resource Site: http://www.msexchange.org/ Windows Security Resource Site: http://www.windowsecurity.com/ Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: ntpro@xxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')