Hi Tom, Sorry - its getting close to midnight - those would be the helpful details. I have configured (and unconfigured) RRAS services through the RRAS MMC snapin as part of fault finding. At one stage I was able to have a VPN Connection inbound up and stable - but I think that this may have been a fluke or a connection to the RRAS server without ISA being involved (possibly during an ISA service restart). I'm getting this event happening at every connect attempt. Logon Failure: Reason: An error occurred during logon User Name: HGS Domain: ELGXINT Logon Type: 3 Logon Process: IAS Authentication Package: MICROSOFT_AUTHENTICATION_PACKAGE_V1_0 Workstation Name: Status code: 0xC000005E Substatus code: 0x0 Caller User Name: TOR$ Caller Domain: ELGXINT Caller Logon ID: (0x0,0x3E7) Caller Process ID: 836 Transited Services: - Source Network Address: - Source Port: - Outbound is possibly related: I'm getting a "Initiated Connection" to dest. port 1723, then the same to dest. port 0, then a closed connection almost immediately afterwards. In addition to this, I'm finding Kerberos items in the event log, that looks like http://support.microsoft.com/?kbid=890477 <http://support.microsoft.com/?kbid=890477> although I'm not sure if this is relevant. I have not applied ISA SP1 this time around, but it appears that the SP1 is not relevant. Many thanks, Anthony _____ From: Thomas W Shinder [mailto:tshinder@xxxxxxxxxxx] Sent: Wednesday, 24 August 2005 23:08 To: [ISAserver.org Discussion List] Subject: [isalist] RE: Problematic VPN Access via ISA2004 http://www.ISAserver.org Hi Anthony, What ball are you following? Where are you see failures? thanks! Tom www.isaserver.org Tom and Deb Shinder's Configuring ISA Server 2004 http://tinyurl.com/3xqb7 <http://tinyurl.com/3xqb7> MVP -- ISA Firewalls _____ From: Anthony Michaud [mailto:anthonym@xxxxxxxxxxxxxx] Sent: Wednesday, August 24, 2005 8:00 AM To: [ISAserver.org Discussion List] Subject: [isalist] Problematic VPN Access via ISA2004 http://www.ISAserver.org Hi Guys, Looking for some assistance, reference, 2x4 blocks of timber etc :) I am attempting to configure VPN access (inbound and outbound) on an ISA server 2004, running on a fresh W2k3 slipstreamed SP1 installation. Celeron 2.6Ghz, 1Gb RAM, <cough>realtek<cough> NIC's Can someone point me at some detailed documentation for setting this up? I'm following the bouncing ball (or what I thought was the bouncing ball) and its hit a rock and I've now lost the ball! Any assistance would be greatly appreciated. Anthony. ------------------------------------------------------ List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ ------------------------------------------------------ Visit TechGenix.com for more information about our other sites: http://www.techgenix.com ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: tshinder@xxxxxxxxxxxxxxxxxx To unsubscribe visit http://www.webelists.com/cgi/lyris.pl?enter=isalist Report abuse to listadmin@xxxxxxxxxxxxx ------------------------------------------------------ List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ ------------------------------------------------------ Visit TechGenix.com for more information about our other sites: http://www.techgenix.com ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: anthonym@xxxxxxxxxxxxxx To unsubscribe visit http://www.webelists.com/cgi/lyris.pl?enter=isalist Report abuse to listadmin@xxxxxxxxxxxxx