So my default site is on port 80 but on the internal NIC I changed ISA auto discovery from port 80 internal to port 85. since then ive got this problem William -----Original Message----- From: Quillman Shawn (RBNA/CIT1.1) * [mailto:Shawn.Quillman@xxxxxxxxxxxx] Sent: 17 April 2003 13:38 To: [ISAserver.org Discussion List] Subject: [isalist] RE: Port 80 on external interface Do you have IIS disabled? Or have you at least changed the default site to something other than port 80? -Shawn ----- Shawn R. Quillman Robert Bosch Corporation RBNA/CIT1.1 38000 Hills Tech Drive Farmington Hills, MI 48331 (248) 553-1164 (P) (248) 848-2855 (F) shawn.quillman@xxxxxxxxxxxx -----Original Message----- From: William England [mailto:administrator@xxxxxxxxxxxxx] Sent: Wednesday, April 16, 2003 4:02 PM To: [ISAserver.org Discussion List] Subject: [isalist] Port 80 on external interface http://www.ISAserver.org Hi I am getting the following error in my Event Log. Any idea how I can find out what is using the port? Web Proxy service failed to bind its socket to 10.0.0.1 port 80. This could be caused by another service that is already using the same port or by a network interface card that is not functional. The error code specified in the Data area of the event properties indicates the cause of the failure. For more information about this event, see ISA Server Help. Nothing in IIS uses this 80 and the 10.x network is the external network ------------------------------------------------------ List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ ------------------------------------------------------ Exchange Server Resource Site: http://www.msexchange.org/ Windows Security Resource Site: http://www.windowsecurity.com/ Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: shawn.quillman@xxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')