RE: Pblishing Pcanyhwere Behind isa
- From: "Karthik Janakiraman" <KarthikJ@xxxxxxxxx>
- To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
- Date: Thu, 16 Jan 2003 12:46:04 -0500
Ok fine then I should do reservation in the RRAS for dns and web and
pcanyhwere mapping all respective internal and external ip address and
then define protocol Definitions and Server Publications in the ISA
Server? Is this correct.
Thanks and Regards
J.Karthik
-----Original Message-----
From: John Tolmachoff [mailto:isalist@xxxxxxxxxxxx]
Sent: Thursday, January 16, 2003 12:30 PM
To: [ISAserver.org Discussion List]
Subject: [isalist] RE: Pblishing Pcanyhwere Behind isa
http://www.ISAserver.org
You have to do that in RRAS on the ISA server.
John Tolmachoff MCSE, CSSA
IT Manager, Network Engineer
RelianceSoft, Inc.
Fullerton, CA 92835
www.reliancesoft.com
> -----Original Message-----
> From: Karthik Janakiraman [mailto:KarthikJ@xxxxxxxxx]
> Sent: Thursday, January 16, 2003 8:57 AM
> To: [ISAserver.org Discussion List]
> Subject: [isalist] RE: Pblishing Pcanyhwere Behind isa
>
> http://www.ISAserver.org
>
>
> Thanks a lot for your mail. Here is the problem I am facing. The
> External Ip Address of ISA Server is x.x.x.x1 and the internal ip
> address of the ISA Server is 192.168.15.1. I have one more system with
> ip address 192.168.15.211 for which I want to make it as DNS Server to
> query Internet DNS Issue. I have registered x.x.x.x2 with internic.
Now
> when I add x.x.x.x2 ip address as secondary ip in the External NIC
Card
> of my ISA Server and create protocol Definitions and Server Publishing
> Rules for 192.168.5.211 with x.x.x.x2 and try Pcanyhwere it does not
> work. But when I do the same thing for 192.168.5.211 with x.x.x.x1(my
> primary external ip for ISA) it works. How can I make one to one
nating
> for a public and the private address and open up appropriate ports for
> pcanyhwere and dns. The Ip address x.x.x.x2 is added as secondary ip
> address in the External Interface of ISA Server.
>
> -----Original Message-----
> From: John Tolmachoff [mailto:isalist@xxxxxxxxxxxx]
> Sent: Thursday, January 16, 2003 11:11 AM
> To: [ISAserver.org Discussion List]
> Subject: [isalist] RE: Pblishing Pcanyhwere Behind isa
>
> http://www.ISAserver.org
>
>
> > I am new to ISA Server and now trying to configure. I tried DNS and
> web
> > yesteray but i got a 403 error when i try to access from outside.
> Today i
> > want to check simple pcanyhwere connection. I followed the step in
> > accordance with the publised document about publishing pcanyhwere in
> > isaserver web site. Created 4 protocol definitions(tcp,udp,561,5632)
> and
> > created 4 Server publishing rule pointing towards the public ip
> address
> > and the private ip address. But when i tried connecting from outside
> the
> > firwall it did not work. I added the public ip address in the
external
> > interface of the ISA Firewall. Is this correct. Should i define
> something
> > in the Access Policy also for the pcanyhwere to work from outside?
Can
> > come guide me in this regard.
>
> 4 protocol definitions? You only need 2, TCP 5631 and UDP 5632.
>
>
http://service1.symantec.com/SUPPORT/pca.nsf/docid/1998122810210812?Open
> Docu
> ment&src=hot&prod=pcAnywhere&ver=10.5%20for%20Windows%2095/98/Me/NT/
> 2000
> /XP&
>
stg=2&base=http://www.symantec.com/techsupp/pca/&next=pca_105_search_sol
> ve.h
> tml&sone=pca_105_tasks.html&tpre=
>
>
> John Tolmachoff MCSE, CSSA
> IT Manager, Network Engineer
> RelianceSoft, Inc.
> Fullerton, CA 92835
> www.reliancesoft.com
>
>
>
>
> ------------------------------------------------------
> List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist
> ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp
> ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ
> ------------------------------------------------------
> Exchange Server Resource Site: http://www.msexchange.org/
> Windows Security Resource Site: http://www.windowsecurity.com/
> Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
> ------------------------------------------------------
> You are currently subscribed to this ISAserver.org Discussion List as:
> karthikj@xxxxxxxxx
> To unsubscribe send a blank email to
> $subst('Email.Unsub')
>
> ------------------------------------------------------
> List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist
> ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp
> ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ
> ------------------------------------------------------
> Exchange Server Resource Site: http://www.msexchange.org/
> Windows Security Resource Site: http://www.windowsecurity.com/
> Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
> ------------------------------------------------------
> You are currently subscribed to this ISAserver.org Discussion List as:
> isalist@xxxxxxxxxxxx
> To unsubscribe send a blank email to
$subst('Email.Unsub')
------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist
ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp
ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
Exchange Server Resource Site: http://www.msexchange.org/
Windows Security Resource Site: http://www.windowsecurity.com/
Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
karthikj@xxxxxxxxx
To unsubscribe send a blank email to
$subst('Email.Unsub')
Other related posts:
