You have to create rules to allow specific traffic through ISA; by default, it allows nothing. Jim Harrison MCP(NT4, W2K), A+, Network+, PCG http://isaserver.org/authors/harrison/ Read the books! ----- Original Message ----- From: "Lim, Arthus T." <alim@xxxxxxxxx> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> Sent: Wednesday, June 26, 2002 10:08 PM Subject: [isalist] Re: Packet Filtering http://www.ISAserver.org ICMP ping request was included already on my filtering list even before. When packet filtering is on, all users connected to the ISA couldn't surf. What else have I missed out? How about allowing http 80? -----Original Message----- From: Jim Harrison [mailto:jim@xxxxxxxxxxxx] Sent: Wednesday, June 26, 2002 1:01 PM To: [ISAserver.org Discussion List] Subject: [isalist] Re: Packet Filtering http://www.ISAserver.org Turn packet filtering back on. If you want to enable / disable pings to ISA for troubleshooting, create a packet filter that allows "ICMP ping request" inbound on the default external IP and leave it disabled until you need it. Disabling packet filtering just gives you an expensive, limited router. Jim Harrison MCP(NT4, W2K), A+, Network+, PCG http://isaserver.org/authors/harrison/ Read the books! ----- Original Message ----- From: "Lim, Arthus T." <alim@xxxxxxxxx> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> Sent: Tuesday, June 25, 2002 6:58 PM Subject: [isalist] Packet Filtering http://www.ISAserver.org My ISA server is running for a month now. A couple of weeks ago, I couldn't get into any sites, when I tried to ping my public ip, it's not working. I checked the logs in ISA and the reports say that some UDP and TCP sessions are being blocked. Disabling the packet filtering option solved the problem. But I don't want packet filtering option to be disabled permanently, what should I set in the packet filtering to be able to use the surfing, the only options installed right now are ICMP's and UDP's. Hope you can enlighten me with this. Thanks. ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: jim@xxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: alim@xxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: jim@xxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')