Not sure if this makes a difference, but PCA is installed on a Client on my network, not the Server. And again I am trying to connect to another computer outside of my network who is hosting. Sorry for the garbled message prior to this one. Chris -----Original Message----- From: Christian Villeneuve Sent: Friday, June 07, 2002 12:17 PM To: [ISAserver.org Discussion List] Subject: [isalist] RE: PC Anywhere 9.x http://www.ISAserver.org Using it on Windows 2000 machine, but thanks for the info. :) Chris -----Original Message----- From: John Tolmachoff [mailto:isalist@xxxxxxxxxxxx] Sent: Friday, June 07, 2002 12:05 PM To: [ISAserver.org Discussion List] Subject: [isalist] RE: PC Anywhere 9.x http://www.ISAserver.org Just in case, 9.x does not work with Windows XP. You must have 10.2 I think. John Tolmachoff IT Manager, Network Engineer RelianceSoft, Inc. Fullerton, CA 92835 www.reliancesoft.com -----Original Message----- From: Christian Villeneuve [mailto:Christian.Villeneuve@xxxxxxxx] Sent: Friday, June 07, 2002 8:57 AM To: [ISAserver.org Discussion List] Subject: [isalist] PC Anywhere 9.x http://www.ISAserver.org Hello, I am having a problem with using PC Anywhere to connect to a Client who is hosting PC Anywhere. I've created the 4 protocol Definitions: TCP 5631 Outbound TCP 5632 Outbound UDP 5631 Send UDP 5632 Send And created a Protocol rule using these definitions, but I am still not able to connect to the host. For testing puposes, I've used a laptop and connected to the internet, and then tried PCA specifying the IP address that our Client provided and it works. Can anyone help with this? Thanks in advance. Chris ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: isalist@xxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: Christian.Villeneuve@xxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: Christian.Villeneuve@xxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')