RE: One-to-One NAT via RRAS+ISA
- From: "Thomas W. Shinder" <tshinder@xxxxxxxxxxxxxxxxxx>
- To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
- Date: Fri, 7 Sep 2001 15:31:44 -0500
Hi Reid,
You can put the public machines on a DMZ segment, and then packets will
be routed, rather than translated or proxied.
HTH,
Tom
www.isaserver.org/shinder
Thomas W Shinder, M.D., MCSE, MCT
-----Original Message-----
From: Reid Warner [mailto:rwarner@xxxxxxxxxxxxx]
Sent: Friday, September 07, 2001 3:07 PM
To: [ISAserver.org Discussion List]
Subject: [isalist] RE: One-to-One NAT via RRAS+ISA
http://www.ISAserver.org
How about applying static routes to the ISA box then running ISA in
dedicated firewall mode?
Basically, I have a range of public IP's I just want to map to internal
IP's and only have ISA perform packet filetering. I don't want it to
have control over authentication, and I do not want it to proxy outbound
requests. Basically, I want it perform simply like a Sonicwall product.
I'm trying to emulate that process.
Thanks!
> -----Original Message-----
> From: Thomas W. Shinder [mailto:tshinder@xxxxxxxxxxxxxxxxxx]
> Sent: Friday, September 07, 2001 1:00 PM
> To: [ISAserver.org Discussion List]
> Subject: [isalist] RE: One-to-One NAT via RRAS+ISA
>
>
> http://www.ISAserver.org
>
>
> Hi Reid,
>
> That won't work because you cannot run both ISA Server and
> the Win2k RRAS NAT at the same time.
>
> HTH,
> Tom
> www.isaserver.org/shinder
>
>
>
>
> Thomas W Shinder, M.D., MCSE, MCT
>
>
>
> -----Original Message-----
> From: Reid Warner [mailto:rwarner@xxxxxxxxxxxxx]
> Sent: Friday, September 07, 2001 2:56 PM
> To: [ISAserver.org Discussion List]
> Subject: [isalist] One-to-One NAT via RRAS+ISA
>
>
http://www.ISAserver.org
Has anyone has success in configuring one-to-one NAT in RRAS, then
loading ISA and **only** using it for packet filtering?
Thanks,
Reid Warner
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
tshinder@xxxxxxxxxxxxxxxxxx To unsubscribe send a blank email to
$subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
rwarner@xxxxxxxxxxxxx To unsubscribe send a blank email to
$subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
tshinder@xxxxxxxxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
Other related posts:
