RE: On Opening Outbound Port
- From: "Stefaan Pouseele" <stefaan.pouseele@xxxxxxx>
- To: "'[ISAserver.org Discussion List]'" <isalist@xxxxxxxxxxxxx>
- Date: Mon, 9 Jun 2003 21:31:40 +0200
Hi Chen,
allow the newly created protocol definition in a protocol rule.
HTH,
Stefaan
-----Original Message-----
From: CY Chen [mailto:cychen@xxxxxxxxxxxxxxx]
Sent: maandag 9 juni 2003 21:24
To: [ISAserver.org Discussion List]
Subject: [isalist] On Opening Outbound Port
http://www.ISAserver.org
Hi All,
I would like to confirm a way to open the outbound port on ISA Server.
I have defined a protocol definition for outbound TCP traffic on port 1098.
What is the next step to open this port on the firewall so that the client
behind the firewall can establish a connection with the server running out
in the Internet?
When I do the telnet command from the machine behind the firewall to the
server running outside the firewall, the connection cannot be established
and that is how I verified that the firewall seems to still have this port
1098 blocked for outbound traffic.
The command I used is:
telnet <ip of server running in the Internet> 1098
In brief, how do I open up port 1098 on my firewall for outbound traffic.
Your response and input are deeply appreciated.
Regards,
C.Y. Chen
Fujitsu Software Corporation
------------------------------------------------------
List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist
ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp
ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ
------------------------------------------------------
Other Internet Software Marketing Sites:
Leading Network Software Directory: http://www.serverfiles.com
No.1 Exchange Server Resource Site: http://www.msexchange.org
Windows Security Resource Site: http://www.windowsecurity.com/
Network Security Library: http://www.secinf.net/
Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
stefaan.pouseele@xxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
Other related posts:
