re: OWA !!!! I GIVE UP !!! and I have both Shinder books
- From: "cdawkins" <cdawkins@xxxxxxxxxxxxx>
- To: isalist@xxxxxxxxxxxxx
- Date: Sat, 8 Mar 2003 03:38:10 -0700
Problem Report
Condition TCP error was detected while attempting to retrieve the URL:
'http://192.168.1.2/Exchange'.
Hi
Message is shown below
--------------------------------------------------------------------------------
Problem Description: TCP/IP processing failure.
Try RELOADING the page.
This error message means that the target host did not properly respond to
HTTP GET request after successfully establishing TCP connection. This may
be due to problems like congestion on target host or transmission path.
If this problem persists for extended periods of time, contact your
network support team. Please, first make sure that the target is really
reachable and not, for example, out of service due to maintenance.
--------------------------------------------------------------------------------
Regards
> Hi Cdawk,
>
> What is the *EXACT* error you see?
>
> Thanks!
> Tom
>
> Thomas W Shinder=20
> www.isaserver.org/shinder=20
> ISA Server and Beyond: http://tinyurl.com/1jq1=20
> Configuring ISA Server: http://tinyurl.com/1llp=20
>
>
>
> -----Original Message-----
> From: cdawkins [mailto:cdawkins@xxxxxxxxxxxxx]=20
> Sent: Wednesday, March 05, 2003 3:49 AM
> To: [ISAserver.org Discussion List]
> Subject: [isalist] re: OWA !!!! I GIVE UP !!! and I have both Shinder
> books
>
>
> http://www.ISAserver.org
>
>
> Hi again
>
> What I have at the moment is to authenticate all incoming users, this is
> why I get the logon screen. However when I turn this off, then my
> external
> computer connects to the ISA server (I can see the session on ISA) but
> nothing happens for a few minutes then it returns an error. Usually
> TCP/IP
> processing error, but when I run IIS using anonymous loging (IUSR_EXCH
> user and password) then I sometimes get that the object is not there (or
> something similar).
>
> It just wont work externally. One thing that bugs me is that the server
> is
> called servername.local, while the OWA rule Action tab must say
> servername.com since this is the externally known DNS name. If I put
> servername.local as the referal server with servername.com in the
> destination set I usually get a hostname not resolved error. I have even
> tried with the local server IP address for the referal server then I get
> a
> TCP/IP processing error indicating the Internal server IP address. So
> the
> name in the action tab is obviously important.
>
> I think I have tried most combinations and I still get nowhere. I need
> to
> get this service running!
>
> Regards
> > Hi Cdawk,
> >=20
> > Check out Chapter 6 in ISA Server and Beyond. That chapter has all the
> > livid details on OWA publishing.
> >=20
> > Regarding domain names, its doesn't matter, although I recommend that
> > you use a split DNS or a HOSTS file so that you can redirect using the
> > same name that the external user uses to access the site.
> >=20
> > Also, make sure that you are NOT forcing authentication on the
> > publishing rule or on the Incoming Web Requests listener.
> >=20
> > HTH,
> > Tom
> >=20
> > P.S.: Thanks for getting the books! :-)
> >=20
> > Thomas W Shinder=3D20
> > www.isaserver.org/shinder=3D20
> > ISA Server and Beyond: http://tinyurl.com/1jq1=3D20
> > Configuring ISA Server: http://tinyurl.com/1llp=3D20
> >=20
> >=20
> >=20
> > -----Original Message-----
> > From: cdawkins [mailto:cdawkins@xxxxxxxxxxxxx]=3D20
> > Sent: Tuesday, March 04, 2003 12:16 PM
> > To: [ISAserver.org Discussion List]
> > Subject: [isalist] re: OWA !!!! I GIVE UP !!! and I have both Shinder
> > books
> >=20
> >=20
> > http://www.ISAserver.org
> >=20
> >=20
> >=20
> > I am using explorer 5.0 clients. Authentication is basic.=3D20
> > As I said, it does authenticate because if I type the wrong password
> > then
> > it asks again. If I type the right password then it goes away, then
> > stays
> > away for about 3 minutes then comes back with TCP/IP Processing error.
> I
> > have followed every instruction I could find (I HAVE BOTH SHINDER
> BOOKS)
> > but it still doesn't work.
> >=20
> > Questions:
> > when I use the web wizard, should I call my internal exchange server
> > companyname.local (which is my our active directory domain name for
> the
> > server) or companyname.com which is the external DNS name?
> >=20
> > What do I do with DNS? Do I have to add the companyname.com forward
> zone
> > as well as the companyname.local zone I already have (DDNS updates
> using
> > Active directory integrated zone)?
> >=20
> >=20
> > Regards
> > desparate
> >=20
> >=20
> >=20
> >=20
> >=20
> > ------------------------------------------------------
> > List Archives: http://www.webelists.com/cgi/lyris.pl?enter=3D3Disalist
> > ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp
> > ISA Server FAQ: =
> http://www.isaserver.org/pages/larticle.asp?type=3D3DFAQ
> > ------------------------------------------------------
> > Exchange Server Resource Site: http://www.msexchange.org/
> > Windows Security Resource Site: http://www.windowsecurity.com/
> > Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
> > ------------------------------------------------------
> > You are currently subscribed to this ISAserver.org Discussion List as:
> > tshinder@xxxxxxxxxxxxxxxxxx
> > To unsubscribe send a blank email to
> $subst('Email.Unsub')
>
> ------------------------------------------------------
> List Archives: http://www.webelists.com/cgi/lyris.pl?enter=3Disalist
> ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp
> ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=3DFAQ
> ------------------------------------------------------
> Exchange Server Resource Site: http://www.msexchange.org/
> Windows Security Resource Site: http://www.windowsecurity.com/
> Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
> ------------------------------------------------------
> You are currently subscribed to this ISAserver.org Discussion List as:
> tshinder@xxxxxxxxxxxxxxxxxx
> To unsubscribe send a blank email to $subst('Email.Unsub')
Other related posts:
