Thanks for the suggestions but none let me get internet access, I have a packet filter and a protocol rule for http port 80 and I still don't get net access on the ISA Itself This is what appears in the logs #Fields: date time source-ip destination-ip protocol param#1 param#2 filter-rule interface 2002-02-25 21:15:16 213.123.??.?? 207.46.230.219 Tcp 4156 80 BLOCKED Dialout Thanks Mark -----Original Message----- From: Stefaan Pouseele [mailto:stefaan.pouseele@xxxxxxx] Sent: 25 February 2002 20:23 To: [ISAserver.org Discussion List] Subject: [isalist] RE: No Internet Access IN ISA Itself http://www.ISAserver.org Hi Mark, this is normal behaviour. ISA is a firewall and not a workstation ;-) If you need access from ISA to external you need to define packet filters for the protocol/ports you want to access. The only exception is for web browsing. You can make the browser on ISA a web proxy client. Define in your browser the internal interface of ISA as proxy server. Regards, Stefaan -----Original Message----- From: Mark Barton [mailto:mark.barton@xxxxxxxxxxxxxx] Sent: zondag 24 februari 2002 19:11 To: [ISAserver.org Discussion List] Subject: [isalist] No Internet Access IN ISA Itself http://www.ISAserver.org Hi, I have an ISA Server configured to use a dial-up Account to the Internet, I have Packets Filters and IP Routing Enabled, When I try to access the internet from the ISA Itself it just times out but everything works fine from the client PC's - I have enabled the DHCP Packet filter as described on ISAServer.org When I check the packet filter logs the Source IP appears as the public IP address instead of the private address of the server and it blocks the request - Is this correct?? Regards Mark Barton MCP ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: stefaan.pouseele@xxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: mark.barton2@xxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')