Thanks for the reply. I think you are correct and I will check it out this afternoon. Shane ----- Original Message ----- From: Alain Caron To: [ISAserver.org Discussion List] Sent: Tuesday, August 06, 2002 8:33 AM Subject: [isalist] RE: Netserver LC3 beeps but runs fine http://www.ISAserver.org You probably have a NetRaid RAID adapter... and there is probably a failed drive in your array... With the Netraid controller there is a software to control the card with that you will be able to stop the beeps and see what is the problems... But haven't worked with that type of hardware for more than 1 year i don't remember the name of the software but it should have a HP icon.... Hope it help. P.S. I've had a lot of trouble with Netraid array only because of a faulty SCSI cable.... -----Original Message----- From: Shane Mullins [mailto:tsmullins@xxxxxxxxxxxxxx] Sent: 6 août, 2002 08:11 To: [ISAserver.org Discussion List] Subject: [isalist] Netserver LC3 beeps but runs fine http://www.ISAserver.org I know this is not a pure ISA question, but any responses would be greatly appreciated. We have a HP Netserver LC3 Dual PIII 500s'. The machine beeps extremely loud, but runs fine. I checked the documentation and it gave no clues as to this error code. I think it has something to do with one of the raid drives. Any help would be appreciated, this beeping is driving me crazy. Thanks Shane ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: alacar@xxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: tsmullins@xxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')