You say "new segment"; can each segment see each other without ISA? ISA is a poor router; it's not designed to function that way. Jim Harrison MCP(NT4, W2K), A+, Network+, PCG http://isaserver.org/authors/harrison/ Read the books! ----- Original Message ----- From: Fabrizio Bocci To: [ISAserver.org Discussion List] Sent: Thursday, July 04, 2002 6:14 AM Subject: [isalist] Multiple IP addresses http://www.ISAserver.org I have a 3 homed DMZ working perfectly since last autumn. Now i need to gain access to a different internal subnet from my internal network ex: all my computers are on 192.168.1.X and i should connect a 10.1.0.x network. I have inserted that renge into LAT and added a 10.1.0.X address to my internal interface( it was 192.168.1.1 and now has also 10.1.0.10). The routing table is added correctly but i canno reach that segment. WHat is the problem? thanks in advance Fabrizio Bocci ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: jim@xxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')