RE: Making Progress but Still Need Help

  • From: "Jonathan W. Gravois" <wynnewade@xxxxxxxxxxxx>
  • To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
  • Date: Sat, 21 Jul 2001 16:12:34 -0500

I have an external address bound to one NIC on the ISA server and
192.168.1.1 bound to the other. The web server is 192.168.1.2 and the
workstation is set to get an address dynamically.

From all three boxes I can browse to my website using http://192.168.1.2 and
from the web server using http://localhost and http://127.0.0.1. But I can't
get there using the external NIC address or by using the FDQN.

Jon

-----Original Message-----
From: Thomas W. Shinder [mailto:tshinder@xxxxxxxxxxxxxxxxxx]
Sent: Saturday, July 21, 2001 4:06 PM
To: [ISAserver.org Discussion List]
Subject: [isalist] RE: Making Progress but Still Need Help


http://www.ISAserver.org


Hi Jon,

Hmm. Could be be that the IP permissions list is not allowing access to
any computers other than the localhost?

Tom
www.isaserver.org/shinder


-----Original Message-----
From: Jonathan W. Gravois [mailto:wynnewade@xxxxxxxxxxxx]
Sent: Saturday, July 21, 2001 4:02 PM
To: [ISAserver.org Discussion List]
Subject: [isalist] RE: Making Progress but Still Need Help


http://www.ISAserver.org


No, same error when using IP address rather than URL

Jon

-----Original Message-----
From: Thomas W. Shinder [mailto:tshinder@xxxxxxxxxxxxxxxxxx]
Sent: Saturday, July 21, 2001 3:58 PM
To: [ISAserver.org Discussion List]
Subject: [isalist] RE: Making Progress but Still Need Help


http://www.ISAserver.org


Hi Jon,

Can you access the internal server when you use its IP address in the
URL?

Tom
www.isaserver.org/shinder



------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
tshinder@xxxxxxxxxxxxxxxxxx To unsubscribe send a blank email to
$subst('Email.Unsub')

------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
wynnewade@xxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')



Other related posts: