Hi Jack, If you could post the specific errors that your receiving that would be most helpful. I've seen this same message posted on the list before but, just don't have the right \ Link for you at this time. Thank you, Joseph -----Original Message----- From: SMREKAR@xxxxxxxxxxxxxx [mailto:SMREKAR@xxxxxxxxxxxxxx] Sent: Tuesday, April 09, 2002 4:29 PM To: [ISAserver.org Discussion List] Subject: [isalist] MS Proxey service http://www.ISAserver.org I have installed ISA server in cache mode on our server. The server is Win 2k SP2 installed. The problem seems that the Proxy service will just stop running. We get the message that it has done something in so many times that it just shuts down the service. We also get an error at the same time about the IP address being unable to bind the NIC to the IP at port 80. this will happen if no one is using the server as well as if we just have our dept on, about 8 people, as a test before we put it back into production. Is there a conflict with SP2 installed for Win 2K? or is there something that we are missing when it gets setup initially. We did have it working for about 4 months then all of a sudden it stopped working and a reinstall of the ISA software did fix it for a short period of time but we finally had to start from scratch. Now we are getting all of these errors and the service stops. TIA Jack Smrekar Appleton Area School District ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: cismic@xxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')