Re: Linkpoint port 1139 cant make it work ARRRRGH
- From: "Jim Harrison" <jim@xxxxxxxxxxxx>
- To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
- Date: Thu, 29 Nov 2001 22:03:07 -0800
Since you're using SSL, you need to add SSL ports to the ISA :
http://support.microsoft.com/default.aspx?scid=kb;EN-US;q283284&GSSNB=1
Jim Harrison
MCP(NT4, W2K), A+, Network+, PCG
http://isaserver.org/authors/harrison/
----- Original Message -----
From: Colter Bowman
To: [ISAserver.org Discussion List]
Sent: Thursday, November 29, 2001 15:20
Subject: [isalist] Linkpoint port 1139 cant make it work ARRRRGH
http://www.ISAserver.org
I have a webserver that is internal using the linkpoint wrapper CFtag for
processing credit card transactions.
The tag uses port 1139 to communicate with the linkpoint secure gateway.
My internal web server won't connect to the linkpoint gateway through port
1139
I have made protocol definition for 1139 inbound first then added a
secondary for outbound on the same 1139
I then made a protocol rule for it to allow
I then make a server publishing rule for the protocol
The error the CFX tag gives me is : unable to connect to SSL server.
This SSL server is using 1139 to communicate. I have verified that it is
using just this port for in and out after calling linkpoint tech support.
The tag keeps telling me that it cant connect. I know it works when the
server is on the outside but I can't seem to make ISA communicate correctly
with my internal webserver and the linkpoint servers via port 1139
I even tried to make a web publishing rule for the port as well and no dice.
Every single config I try doesn't work.
I have also deleted all of the protocol rules and publishing rules and
recreated them STILL NOTHING.
Someone please tell me something cuz I am losing many dollars daily because
I can't process transactions on my friggin site. LAME LAME LAME.
Sean
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
jim@xxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
Other related posts:
