Re: ISAserver and FrontPage
- From: "Gamlem, Noralf" <Noralf.Gamlem@xxxxxxxxxxxx>
- To: "'[ISAserver.org Discussion List]'" <isalist@xxxxxxxxxxxxx>
- Date: Wed, 20 Feb 2002 16:25:49 +0100
After discussing with the Technical Manager at our ISP we finally got it up
and running! I told him about this knowledgebase article and the rest of our
discussion and then he came up with a suggestion: Turn of "Microsoft
integrated autentication" on the IIS, he did so and everything worked
superb! The difference we could observe on our side was that the logon popup
did not ask for domain any more. I suppose we now send the password in clear
text, but... :-)
Thanks a lot for your assistance!
-Noralf-
-----Original Message-----
From: Jim Harrison [mailto:jim@xxxxxxxxxxxx]
Sent: 20. februar 2002 16:01
To: [ISAserver.org Discussion List]
Subject: [isalist] Re: ISAserver and FrontPage
http://www.ISAserver.org
It's certainly worth a try..
As far as the credentials settings on ISA, those only apply to using ISA
with an authenticating upstream proxy.
Does that fit your scenario?
Jim Harrison
MCP(NT4, W2K), A+, Network+, PCG
http://isaserver.org/authors/harrison/
<http://isaserver.org/authors/harrison/>
Read the books!
----- Original Message -----
From: Gamlem, Noralf <mailto:Noralf.Gamlem@xxxxxxxxxxxx>
To: [ISAserver.org Discussion List] <mailto:isalist@xxxxxxxxxxxxx>
Sent: Wednesday, February 20, 2002 05:06
Subject: [isalist] Re: ISAserver and FrontPage
http://www.ISAserver.org <http://www.ISAserver.org>
I've found a knowledgebase article at Microsoft with interesting stuff:
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q237960
<http://support.microsoft.com/default.aspx?scid=kb;en-us;Q237960>
This is very similar to our problems with ISAserver. Any idea what we could
try?
-Noralf-
-----Original Message-----
From: Gamlem, Noralf [mailto:Noralf.Gamlem@xxxxxxxxxxxx]
Sent: 19. februar 2002 22:14
To: [ISAserver.org Discussion List]
Subject: [isalist] Re: ISAserver and FrontPage
http://www.ISAserver.org
I am seeing a login popup when trying to connect to the site. BTW: Is it
possible to make the logs even more detailed? I thought perhaps there was
some credentials settings on ISA sine proxy by name means acting on behalf
of someone else... :-)
Thank you very much for your help, hopefully you can help us figure out
this. :-)
-Noralf-
-----Original Message-----
From: Jim Harrison [mailto:jim@xxxxxxxxxxxx]
Sent: 19. februar 2002 22:01
To: [ISAserver.org Discussion List]
Subject: [isalist] Re: ISAserver and FrontPage
http://www.ISAserver.org
Actually, if the ISA logs show "anonymous", it's because FP isn't sending
any credentials. Are you not seeing a popup?
ISA shouldn't hold any credentials, BTW; that's a huge security hole...
Jim Harrison
MCP(NT4, W2K), A+, Network+, PCG
http://isaserver.org/authors/harrison/
<http://isaserver.org/authors/harrison/>
Read the books!
----- Original Message -----
From: Gamlem, Noralf <mailto:Noralf.Gamlem@xxxxxxxxxxxx>
To: [ISAserver.org Discussion List] <mailto:isalist@xxxxxxxxxxxxx>
Sent: Tuesday, February 19, 2002 08:29
Subject: [isalist] Re: ISAserver and FrontPage
http://www.ISAserver.org <http://www.ISAserver.org>
Now I guess we're on the right track! I can see that the error messages say
cs-username is anonymous, shouldn't it be the username I have at my ISP? At
least I'm asked about username and password (and domain) in FP (and I've
tried to adjust settings to ask for username and password, not to use
currently logged on user/password). On the ISAserver I'm not able to
configure any use of username/password, but in my eyes it seems like
ISAserver is not sending the appropriate username/password to my ISP...
-Noralf-
-----Original Message-----
From: Jim Harrison [mailto:jim@xxxxxxxxxxxx]
Sent: 19. februar 2002 15:53
To: [ISAserver.org Discussion List]
Subject: [isalist] Re: ISAserver and FrontPage
http://www.ISAserver.org
Are you still getting the same error messages?
Looking back at your logs, you're getting "403" and "12209", both of which
are "you must authenticate" messages.
Have you entered appropriate credentials in the FP proxy settings?
Jim Harrison
MCP(NT4, W2K), A+, Network+, PCG
http://isaserver.org/authors/harrison/
<http://isaserver.org/authors/harrison/>
Read the books!
----- Original Message -----
From: Gamlem, Noralf <mailto:Noralf.Gamlem@xxxxxxxxxxxx>
To: [ISAserver.org Discussion List] <mailto:isalist@xxxxxxxxxxxxx>
Sent: Monday, February 18, 2002 22:35
Subject: [isalist] Re: ISAserver and FrontPage
http://www.ISAserver.org <http://www.ISAserver.org>
Now I've installed SP1 as well but still I'm unable to run FrontPage 2002
through the ISAserver (same messages as before)... :-(
Any idea where to find more information about this?
-Noralf-
-----Original Message-----
From: Jim Harrison [mailto:jim@xxxxxxxxxxxx]
Sent: 6. februar 2002 23:36
To: [ISAserver.org Discussion List]
Subject: [isalist] Re: ISAserver and FrontPage
http://www.ISAserver.org
Grab hotfix 68; I believe it also contains the fix.
http://www.microsoft.com/downloads/release.asp?releaseid=32094
<http://www.microsoft.com/downloads/release.asp?releaseid=32094>
Jim Harrison
MCP(NT4, W2K), A+, Network+, PCG
http://isaserver.org/authors/harrison/
<http://isaserver.org/authors/harrison/>
Read the books!
----- Original Message -----
From: Gamlem, Noralf <mailto:Noralf.Gamlem@xxxxxxxxxxxx>
To: [ISAserver.org Discussion List] <mailto:isalist@xxxxxxxxxxxxx>
Sent: Wednesday, February 06, 2002 13:15
Subject: [isalist] Re: ISAserver and FrontPage
http://www.ISAserver.org <http://www.ISAserver.org>
Thanks a lot for your answer Jim. Now I've tried to do as indicated in
Q304340, but unfortunately SP1 is withdrawn from the scene so I was only
able to edit the registry.
Anyway, the logfiles are still filled with these messages:
http://www.web.com/_vti_bin/_vti_aut/author.dll
<http://www.web.com/_vti_bin/_vti_aut/author.dll> - 12209
199.200.200.200 anonymous MSFrontPage/5.0 2002-02-06 16:33:51 ISAserver - -
- - - 468 - - POST http://www.web.com/_vti_bin/_vti_aut/author.dll
<http://www.web.com/_vti_bin/_vti_aut/author.dll> - 0
199.200.200.200 DOMAIN\USERID MSFrontPage/5.0 2002-02-06 16:33:51 ISAserver
- www.web.com <http://www.web.com/> 213.184.200.51 80 310 662 1120 http
POST http://www.web.com/_vti_bin/_vti_aut/author.dll
<http://www.web.com/_vti_bin/_vti_aut/author.dll> Inet 401
Any other idea (or perhaps someone who could mail me SP1 for ISAserver)?
-Noralf-
-----Original Message-----
From: Jim Harrison [mailto:jim@xxxxxxxxxxxx]
Sent: 6. februar 2002 20:35
To: [ISAserver.org Discussion List]
Subject: [isalist] Re: ISAserver and FrontPage
http://www.ISAserver.org
Frontpage uses WEBDAV; so this may help you:
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q304340
<http://support.microsoft.com/default.aspx?scid=kb;en-us;Q304340>
Jim Harrison
MCP(NT4, W2K), A+, Network+, PCG
http://isaserver.org/authors/harrison/
<http://isaserver.org/authors/harrison/>
Read the books!
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
jim@xxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
Noralf.Gamlem@xxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
jim@xxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
Noralf.Gamlem@xxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
jim@xxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
Noralf.Gamlem@xxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
Noralf.Gamlem@xxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
jim@xxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
Noralf.Gamlem@xxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
Other related posts:
