You'll have to be a bit more specific about the problem. What rules caused ISA to stop working? How were they defined? What exactly changed in the router? Jim Harrison MCP(NT4, W2K), A+, Network+, PCG http://isaserver.org/authors/harrison/ Read the books! ----- Original Message ----- From: "Amr Omar" <amr_omar@xxxxxxxxxxxxxxxxx> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> Sent: Sunday, May 19, 2002 4:04 AM Subject: [isalist] Re: ISA and Router http://www.ISAserver.org Hi Jim, I just think about this relation when i met a strange situation. I installed ISA server in my LAN that contains 58 PCs and it works proberly but one day the T1 linke is down from my ISP so they change the configuration of the router ( Cisco1700) after that the ISA server works only on the default configuration when i treid to configure a destination set and site and contents rule to deny some site it stops responding if i remove this rules it works again. so where you think the error exists. Note: All things were running corectly before that. Thanks, Amr Omar ----- Original Message ----- From: "Jim Harrison" <jim@xxxxxxxxxxxx> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> Sent: Thursday, May 16, 2002 7:02 PM Subject: [isalist] Re: ISA and Router > http://www.ISAserver.org > > > No; ISA doesn't care who sends the packets... > > Jim Harrison > MCP(NT4, W2K), A+, Network+, PCG > http://isaserver.org/authors/harrison/ > Read the books! > ----- Original Message ----- > From: "Amr Omar" <amr_omar@xxxxxxxxxxxxxxxxx> > To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> > Sent: Wednesday, May 15, 2002 10:20 PM > Subject: [isalist] ISA and Router > > > http://www.ISAserver.org > > > Hi, > i ask about ISA and Routers specially Cisco Routers, if there is a > relation between them or not. > Thanks > Amr Omar > > ------------------------------------------------------ > You are currently subscribed to this ISAserver.org Discussion List as: > jim@xxxxxxxxxxxx > To unsubscribe send a blank email to $subst('Email.Unsub') > > > > ------------------------------------------------------ > You are currently subscribed to this ISAserver.org Discussion List as: amr_omar@xxxxxxxxxxxxxxxxx > To unsubscribe send a blank email to $subst('Email.Unsub') > ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: jim@xxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')