Re: ISA and Power Settings
- From: Joe Pochedley <JoePochedley@xxxxxxxxx>
- To: "'[ISAserver.org Discussion List]'" <isalist@xxxxxxxxxxxxx>
- Date: Tue, 3 Sep 2002 11:26:09 -0400
James,
I think what Jim meant to ask (Jim: please correct me if I'm wrong) is:
Does this happen when ISA is not running?
If the machine constantly goes into standby without ISA running, then this
really isn't an ISA question... You should consult your hardware vendor for
a fix to the problem.
Joe Pochedley
"In the end, if you have cables like
spaghetti on the floor and things only
connect when you swear at them, your
network is perfectly normal." - James Gaskin
-----Original Message-----
From: James Stewart [mailto:jsit@xxxxxxxxxxxxxxxx]
Sent: Tuesday, September 03, 2002 9:46 AM
To: [ISAserver.org Discussion List]
Subject: [isalist] Re: ISA and Power Settings
http://www.ISAserver.org
With ISA
----- Original Message -----
From: Jim Harrison <mailto:jim@xxxxxxxxxxxx>
To: [ISAserver.org Discussion List] <mailto:isalist@xxxxxxxxxxxxx>
Sent: Tuesday, September 03, 2002 11:29 PM
Subject: [isalist] Re: ISA and Power Settings
http://www.ISAserver.org <http://www.ISAserver.org>
Does it happens with or without ISA?
Jim Harrison
MCP(NT4, W2K), A+, Network+, PCG
http://isaserver.org/pages/author_index.asp?aut=3
<http://isaserver.org/pages/author_index.asp?aut=3>
http://isatools.org <http://isatools.org>
Read the books!
----- Original Message -----
From: James <mailto:jsit@xxxxxxxxxxxxxxxx> Stewart
To: [ISAserver.org Discussion List] <mailto:isalist@xxxxxxxxxxxxx>
Sent: Monday, September 02, 2002 11:08 PM
Subject: [isalist] ISA and Power Settings
http://www.ISAserver.org <http://www.ISAserver.org>
Hello to All,
We have installed ISA server on Windows 2000, just a clean
install with no configuration performed it works fine once
we configure it and change a few settings in ISA every 20
Minutes or so the computer seems to standby. I have set
all the power options to never in control panel and
disable the power settings in the bios however this
problem keeps happening. I have re installed windows and
ISA and the same thing happens. Does anyone have any ideas
as to what the cause could be and perhaps how we can go
about fixing it?
Thankyou everyone
Kind Regards,
James
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
jim@xxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
jsit@xxxxxxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
JoePochedley@xxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
Other related posts:
