99 times out of 100, name resolution. Make sure that the name the client is searching for can be found in DNS or WINS. Depending on NetBIOS name broadcasts is just asking for random failures. Jim Harrison MCP(NT4, 2K), A+, Network+, PCG ----- Original Message ----- From: <kdietz@xxxxxxxxx> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> Sent: Monday, October 22, 2001 09:41 Subject: [isalist] ISA Server and Firewall Client http://www.ISAserver.org Hello, I have installed the firewall client software successfully. I get the icon in the system tray. I have enable firewall client checked as well as Automatically Detect ISA server. The firewall service is running on the ISA server. When I hoover above the system tray icon the balloon tells me ' ISA Server could not be detected' If I click on the Update Now button the refresh operation is a success. The balloon the tells me that it is configured to use my isa server. It will though in a few minutes go back to ISA Server could not be detected' What is missing in the communication between the client and the server in order to get to the internet? Thanks Kevin ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: jim@xxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')