Re: ISA Array
- From: "cismic" <cismic@xxxxxxx>
- To: "'[ISAserver.org Discussion List]'" <isalist@xxxxxxxxxxxxx>
- Date: Fri, 11 Jan 2002 21:21:32 -0800
My domain/AD is on one machine. My ISA servers crashed. I mean the
data and everything. So, they had to be reformatted.
When I rebuilt those additional machines, and tried to connect isa
server to the AD. When ran the initialize isa to AD.
The following message box appeared. "Microsoft Security and
Acceleration Sever" definitions could not be installed in active
directory.
I've still been researching to see if I don't have to rebuild my AD
machine. There are only 10 other machines attached where I could joing
workgroup and then rejoin the domain. Just did not want to have to do
this.
I even tried deleting from AD the ISA FPC tree. Still the same thing.
-----Original Message-----
From: Bogdan Florin [mailto:florinb@xxxxxxxxxxx]
Sent: Friday, January 11, 2002 8:42 PM
To: [ISAserver.org Discussion List]
Subject: [isalist] Re: ISA Array
http://www.ISAserver.org
what it is your error Sir ?
describe exactly.
-----Original Message-----
From: "cismic" <cismic@xxxxxxx>
To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
Date: Fri, 11 Jan 2002 12:53:38 -0800
Subject: [isalist] Re: ISA Array
> http://www.ISAserver.org
>
>
> Well those methods did not work. Any additional ideas would be
> helpful,
>
> Thank you,
>
> Joseph
>
> -----Original Message-----
> From: Bogdan Florin [mailto:florinb@xxxxxxxxxxx]
> Sent: Friday, January 11, 2002 1:38 AM
> To: [ISAserver.org Discussion List]
> Subject: [isalist] Re: ISA Array
>
>
> http://www.ISAserver.org
>
>
> 1. Uninstall ISA if you can !
> 2. Install ISA again and setup a NEW array !
> 3. Setup this ISA
> 4. Delete OLD ARRAY !
> 5. Install second ARRAY MEMBER.
>
> Enjoy :))
>
> If you have AD trouble and you have 2 DC than some of your trouble
> will be solved if you manualy move ROLES from one DC to another !
>
> the very breif docs for doing this trought command line it is
> following:
>
> go to dos prompt !
> folowing are commands
> - ntdsutil
> - roles
> - connections
> - connect to server NT
> - q (At the server connections)
>
> Seize PDC
> Seize schema master
> Seize domain naming master
> Seize RID master
> Seize infrastructure master
>
> Doing this and reboot will be a good thing for AD.
>
> I hope this help !
> save samwhere ROLES "docs" because it will help you a lot even in more
> complex enviromennt where you want to setup roles on difrent machines.
>
> -----Original Message-----
> From: "cismic" <cismic@xxxxxxx>
> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
> Date: Thu, 10 Jan 2002 23:37:56 -0800
> Subject: [isalist] ISA Array
>
> > http://www.ISAserver.org
> >
> >
> > Hello,
> >
> > Recently I had 2 machines crash. Both were ISA servers. The
> > external machine was in firewall mode only. The internal ISA was
> > setup as integrated and included in active directory.
> >
> > I don't know why the ISA machines crashed! Looked like possible
> > boot sector virus on both machines. They were built in June. At any
> > rate. Is there a way to easily get the internal machine back into
> > the ISA Array in active directory? I keep getting the message that
> > Internet acceleration server is unable to install definitions into
> > active directory.
> >
> > I've been offline for about 1 week now. Good thing for another
> machine
>
> > to get email! Any clues.
> >
> > You would think that it would be easy to install or uninstall stuff
> > form active directory without issues.
> >
> > Joseph
> >
> >
> >
> > ------------------------------------------------------
> > You are currently subscribed to this ISAserver.org Discussion List
> as:
>
> > florinb@xxxxxxxxxxx To unsubscribe send a blank email to
> > $subst('Email.Unsub')
> >
>
>
>
> ------------------------------------------------------
> You are currently subscribed to this ISAserver.org Discussion List as:
> cismic@xxxxxxx To unsubscribe send a blank email to
> $subst('Email.Unsub')
>
>
> ------------------------------------------------------
> You are currently subscribed to this ISAserver.org Discussion List as:
> florinb@xxxxxxxxxxx To unsubscribe send a blank email to
> $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
cismic@xxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
Other related posts:
