Re: IP Configuration change on ISA
- From: "Jay" <jschwarzkopf@xxxxxxxxxx>
- To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
- Date: Mon, 3 Feb 2003 12:39:49 -0500
You might try using regedit, and searching for your old IP address. When
you find it, delete the reference, or change it to your new internal IP, and
reboot.
----- Original Message -----
From: "Pandey, Shobha" <c-shpandey@xxxxxxxxxxx>
To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
Sent: Monday, February 03, 2003 10:52 AM
Subject: [isalist] IP Configuration change on ISA
> http://www.ISAserver.org
>
>
> Hi All
>
> I changes the internal IP address on the ISA box after stopping the ISA
services and then recreated the rules using the new IP address. The ISA
server is configured for server publishing. Infact I also rebooted the
server. But looks like no connection on port 80 are originating from the
internal ip of the ISA to internal web server.
> I changes the routing rules and also created the rules for the changed IP
address.
> When I try to telnet to internal IP of ISA on port 80, it doesn't answer.
SO looks like its not listening on port 80.
> Any help is appreciated. Its really critical. I just have one more hr left
to configure it.
>
> Thanks
> Shobha Pandey
> Network Operating Systems
> OIS Bureau of Technology
> Department of Public Welfare
> 717 772 7204
>
>
>
> ------------------------------------------------------
> List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist
> ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp
> ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ
> ------------------------------------------------------
> Exchange Server Resource Site: http://www.msexchange.org/
> Windows Security Resource Site: http://www.windowsecurity.com/
> Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
> ------------------------------------------------------
> You are currently subscribed to this ISAserver.org Discussion List as:
jschwarzkopf@xxxxxxxxxx
> To unsubscribe send a blank email to $subst('Email.Unsub')
Other related posts:
