Re: How to route LDAP calls through ISA Server

From: "Jim Harrison" <jim@xxxxxxxxxxxx>
To: "Kingery, Mark" <Mark.Kingery@xxxxxxxxxxxxxx>
Date: Tue, 7 Jan 2003 15:05:25 -0800
How to route LDAP calls through ISA ServerMy bad; you have to create the 
protocol definition:
name: LDAP Server
protocol: TCP
direction: Inbound
local port: 3389
remote port: any
..no secondary connections


 Jim Harrison
 MCP(NT4, W2K), A+, Network+, PCG
 http://isaserver.org/pages/author_index.asp?aut=3
 http://isatools.org
 Read the help / books / articles!

  ----- Original Message ----- 
  From: Kingery, Mark 
  To: 'Jim Harrison' 
  Sent: Tuesday, January 07, 2003 14:14
  Subject: RE: [isalist] Re: How to route LDAP calls through ISA Server


  This may be a silly question.  But I have tried that, one thing I cannot 
figure out is how to make the LDAP Server Protocol appear for the Server 
publishing list.  It is not one of the available protocols I can select.  It 
has been a long to day so forgive me if I have over looked something.

  Thanks
  Mark
    -----Original Message-----
    From: Jim Harrison [mailto:jim@xxxxxxxxxxxx]
    Sent: Tuesday, January 07, 2003 3:55 PM
    To: [ISAserver.org Discussion List]
    Subject: [isalist] Re: How to route LDAP calls through ISA Server


    http://www.ISAserver.org


    You need to create a Server Publishing rule that uses LDAP Server protocol 
and maps the ISA external IP to the internal host IP.
    Wait a few seconds or restart the FW service and enjoy the fun!
    ..make sure the external client can resolve the internal server name to the 
ISA external IP that hosts the publishing rule.

     Jim Harrison
     MCP(NT4, W2K), A+, Network+, PCG
     http://isaserver.org/pages/author_index.asp?aut=3
     http://isatools.org
     Read the help / books / articles!

      ----- Original Message ----- 
      From: Kingery, Mark 
      To: [ISAserver.org Discussion List] 
      Sent: Tuesday, January 07, 2003 08:56
      Subject: [isalist] How to route LDAP calls through ISA Server


      http://www.ISAserver.org


      I have an extranet site ip address is 192.168.2.1 I need it to make LDAP 
requests through my ISA server that has an External IP address of 192.168.1.1.  
I have a server on my internal network that will listen for the LDAP request 
and its IP address is 10.0.0.1.

      Can someone give me a little guidance on how to make this happen in ISA. 

      Thanks 
      Mark 

      ------------------------------------------------------
      List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist
      ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp
      ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ
      ------------------------------------------------------
      Exchange Server Resource Site: http://www.msexchange.org/
      Windows Security Resource Site: http://www.windowsecurity.com/
      Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
      ------------------------------------------------------
      You are currently subscribed to this ISAserver.org Discussion List as: 
jim@xxxxxxxxxxxx
      To unsubscribe send a blank email to $subst('Email.Unsub') 
    ------------------------------------------------------
    List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist
    ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp
    ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ
    ------------------------------------------------------
    Exchange Server Resource Site: http://www.msexchange.org/
    Windows Security Resource Site: http://www.windowsecurity.com/
    Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com
    ------------------------------------------------------
    You are currently subscribed to this ISAserver.org Discussion List as: 
mark.kingery@xxxxxxxxxxxxxx
    To unsubscribe send a blank email to $subst('Email.Unsub')
Re: How to route LDAP calls through ISA Server

Other related posts:
