RE: How to configure to allow Ping and Trace route from clients behin d ISA Server
- From: "Jason Ballard" <jasonb54@xxxxxxxxx>
- To: "'[ISAserver.org Discussion List]'" <isalist@xxxxxxxxxxxxx>
- Date: Thu, 2 May 2002 13:40:05 -0400
Configure the clients as SecureNAT clients and enable IP Routing in the
ISA Management console. That should do it!
Jason
-----Original Message-----
From: Richard Davis [mailto:rwdavis@xxxxxxxxxxxx]
Sent: Thursday, May 02, 2002 1:37 PM
To: [ISAserver.org Discussion List]
Subject: [isalist] How to configure to allow Ping and Trace route from
clients behin d ISA Server
http://www.ISAserver.org
Does anyone know how to configure the ISA server to allow clients to
ping
and run trace route from behind the ISA server?
Richard W. Davis
Director MIS
Giles Enterprises, Inc.
Ph: 334-272-3528
Fax: 334-273-8168
www.gilesent.com
www.chesterfried.com
This E-mail and the material attached with it constitute privileged and
proprietary information. It is intended for the exclusive use of the
person
indicated above. If you are not the intended recipient, you are hereby
notified that any disclosure, copying, distribution or the taking of any
action in reliance on the contents of this electronic information is
strictly prohibited. If you have received this in error, please notify
us
by phone.
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
jasonb54@xxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
Other related posts:
