Thanks, I'll do that and see what it says, not that I typo using only 3 fingers :-) Dan Bartley ________________________________ From: Jim Harrison [mailto:Jim@xxxxxxxxxxxx] Sent: Wed 5/25/2005 11:18 AM To: [ISAserver.org Discussion List] Subject: [isalist] RE: Help with the web proxy setup in ISA 2004 http://www.ISAserver.org Netmon (or Ethereal) is the first, best place to go for this information. Do it this way (use [DHCP] or [Static] according to your IP assignment): 1. open a cmd (say 'dos' to spin Tom) window 2. clear the client name & DHCP caches a. [DHCP] type: 'ipconfig/release' (clears DHCP/name caches in one swell foop) b. [Static] type 'ipfoncig/flushdns & nbtstat -R' 3. disable the FWC if installed 4. start <insert network capture tool here> capturing 5. [DHCP only] a. in the cmd window, type: ipconfig/renew', b. when the lease process completes, save this capture as "Lease.cap" c. start a new capture 6. Enable the FWC 7. Open the FWC control, click "Detect" 8. When the FWC "detection" process completes, stop the capture and save it as "FWC.cap" 9. Restart the network capture 10. Open your browser, type http://isaserver.org <http://isaserver.org/> , wait for the page to load or fail 11. Save this capture as "isaserver.org.cap" ..now you have something to examine (separately from each other, no less). "The key things to look for - especially if you're using DHCP-based wpad is typos in the wpad data. ------------------------------------------------------- Jim Harrison MCP(NT4, W2K), A+, Network+, PCG http://isaserver.org/Jim_Harrison/ <http://isaserver.org/Jim_Harrison/> http://isatools.org <http://isatools.org/> Read the help / books / articles! ------------------------------------------------------- ________________________________ All mail to and from this domain is GFI-scanned.