Hi Brad, Open the ports open the ports. Here it's what I've done. I've defined two new Protocols: KaZaA TCP Outbound KaZaA UDP Outbound KaZaA TCP Outbound: Port: 1214 Protocol: TCP Direction: Outbound KaZaA UDP Outbound: Port: 1214 Protocol: UDP Direction: Receive Send Add a new protocol rule with a proper client set and done. Hope this helps, Gregor -----Original Message----- From: Bradw499 [mailto:bwheeler@xxxxxxxxxxxxxxx] Sent: 07 November 2002 15:43 To: [ISAserver.org Discussion List] Subject: [isalist] Help setting up Kazaa on ISA Server http://www.ISAserver.org We are a very small shop and I have ISA server setup and running. The vice president was using Kazaa and now wants it back. What do I need to do to get it setup. ------------------------------------------------------ List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ ------------------------------------------------------ Exchange Server Resource Site: http://www.msexchange.org/ Windows Security Resource Site: http://www.windowsecurity.com/ Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: gregorstreng@xxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')