Re: Help - Web Server Publishing
- From: "Carson Tu" <ctu@xxxxxxxxxxxx>
- To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
- Date: Wed, 8 May 2002 15:51:36 -0400
Have you configured a package filter to allow "HTTP server", which is inboud 80
traffic? Try to allow all in package filter. publishing works, try to tight it.
Carson
-----Original Message-----
From: Stefano Peduzzi [mailto:Stefano.Peduzzi@xxxxxxxxxxxxx]
Sent: Wednesday, May 08, 2002 2:37 PM
To: [ISAserver.org Discussion List]
Subject: [isalist] Re: Help - Web Server Publishing
http://www.ISAserver.org
> I've created a protocol rule and the internal machine can browse ok. I
> cannot browse from the ISA despite adding a packet filter for HTTP / 80
but
> that's not the end of thr world.
It's better if you make it a web proxy client: in Explorer, Internet
Options, Connection, Lan Setting and put as Proxy your firewall IP ADDRESS.
> What I'm trying to get going is web server publishing. The internal
machine
> is running a web server, http://192.168.1.10 from the ISA will display the
> home page. I have published this using the web publishing wizard, entered
> 192.168.1.10 as the address of the server but it will not work. From IE on
a
> machine on a separate T1 I get "Page cannot be displayed", the ISA log
> appears to BLOCK the connection, there are entries in the log saying the
> access on port 80 was bloxked by xxx.xxx.xxx.194
Have you an entry in public DNS with the name of the web site (ie
www.xxxx.com) and using it to connect?? If so you must configure the
publishing rule using that address. From what I know if you publish a web
site using only your public ip it fails (before SP1.. don't know if it has
been corrected).
Stefano
----- Original Message -----
From: "Chris Lawless" <ChrisL@xxxxxxxxxxxxxxxxxx>
To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
Sent: Wednesday, May 08, 2002 7:34 PM
Subject: [isalist] Help - Web Server Publishing
> http://www.ISAserver.org
>
>
> I must have installed ISA 10 times in the space of a week, I swear it
works
> differently every time!
>
> This time I have two PCs setup. I have a domain controller that is also
> running IIS as 192.168.1.10 connected to this is the ISA with two NICs,
> inside is 192.168.1.9 outside is xxx.xxx.xxx.194
>
> I've created a protocol rule and the internal machine can browse ok. I
> cannot browse from the ISA despite adding a packet filter for HTTP / 80
but
> that's not the end of thr world.
>
> What I'm trying to get going is web server publishing. The internal
machine
> is running a web server, http://192.168.1.10 from the ISA will display the
> home page. I have published this using the web publishing wizard, entered
> 192.168.1.10 as the address of the server but it will not work. From IE on
a
> machine on a separate T1 I get "Page cannot be displayed", the ISA log
> appears to BLOCK the connection, there are entries in the log saying the
> access on port 80 was bloxked by xxx.xxx.xxx.194
>
> There are also a number of connections to Ports 137 and 138 getting
blocked,
> not sure what they are yet.
>
> I have the service pack applied, I've stopped/started services, rebooted
and
> even waited for a while but no joy, am I missing something?
>
> Chris.
>
> ------------------------------------------------------
> You are currently subscribed to this ISAserver.org Discussion List as:
stefano.peduzzi@xxxxxxxxxxxxx
> To unsubscribe send a blank email to $subst('Email.Unsub')
>
>
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
ctu@xxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
Other related posts:
