Hi, On a VPN client do an IPConfig if the RAS IP is not on your Domain subnet try the following In your DHCP server Address Pool set aside a block of excluded IP address, i.e to the number of VPN clients you have. Then in your RRAS on the ISA server Right click on the server container and select the properties. Under the IP tab select the Static Address pool option and ADD the block of internal IP's you created on your DHCP server. This works for me Let me know if it works for you too Regards Jason JasonRichards@xxxxxxxxxxxxxxxxx -----Original Message----- From: Quita Harris [mailto:qharris@xxxxxxxx] Sent: 09 January 2002 14:25 To: [ISAserver.org Discussion List] Subject: [isalist] Help Please! http://www.ISAserver.org Setup: - Stand alone ISA server running in intergrated mode - 2 nics 1 for internal use and the 2nd for external connections - RRAS enable and running on the ISA server (configured with the Local VPN wizard) ALL remote clients pcs are members of the internal Win 2K domain I'm not running WINS because VPN worked before without WINS Problem: 3 weeks ago all remote clients could VPN in, browse network places, see and access ALL machines on the network meaning VPN worked fine. Now when clients VPN in they can see all machines on the network but when they attempt to open a machine they recieve this error: \\server1 network path not found This error message appears for all pcs on the network except the ISA server. Somethings preventing them from browsing devices on the network. Any help would be greatly appreciated! ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: administrator@xxxxxxxxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')