Port 911 is assigned to the following http://www.iana.org/assignments/port-numbers : xact-backup 911 tcp 911 tcp xact-backup xact-backup 911 udp 911 udp xact-backup Try the following: SSL TUNNEL in: UDP Receive-send Local 911 Remote any Local computer <your DNS IP> Remote Computer any SSL TUNNEL out: TCP Outbound Local any Remote 911 Local computer <your DNS IP> Remote Computer any Joseph -----Original Message----- From: Terry Fedirko [mailto:Terry.Fedirko@xxxxxxxxxxx] Sent: Friday, February 01, 2002 6:25 AM To: [ISAserver.org Discussion List] Subject: [isalist] Re: HTTP 502 Proxy Error: 12211 http://www.ISAserver.org I am running IE 6.0 on the same ISA server purely for testing. I configured IE to point to the ISA server on port 8080 (HTTP, Secure, FTP and Gopher). Under ISA, I have created a SSL Tunnel port 911 to talk to one of the upstream proxy server which is a UNIX base system. I do not understand why they use 911 but thats how they configured it. If I tried using IE on a different computer accessing the same ISA server, I still get the same result. One note of interest. I am testing another ISA Server on a different system using the same configuration (more or less) that points to the same upstream proxy server. Somehow (and I don't know why) I was able to access the Intranet but still unable to access the Internet. After a short time, I keep getting a 10060 (permission denied) or 10065 (Host Unreachable). Again, I need help. Any suggestions or ideas???? Terry > Is IE 6.0 on the ISA server? Are you looking at your own sites or an > external site? > > -----Original Message----- > From: Terry Fedirko [mailto:Terry.Fedirko@xxxxxxxxxxx] > Sent: Thursday, January 31, 2002 1:45 PM > To: [ISAserver.org Discussion List] > Subject: [isalist] Re: HTTP 502 Proxy Error: 12211 > > http://www.ISAserver.org > > > I did configure the SSL Tunneling using port 911 recommended by Mcrosoft > Q283284. After running this script, I checked the registry and found > that > the new port has been added (so far so good). I rebooted the machine > (just to be on the safe side) and started up the Internet Explorer > (6.0). > When trying to access a URL, I'm still getting the same old HTTP 502 > 12211 error message. I even try to re-install the ISA Enterprise > (including SP1 - Note: SP2 has been installed on Window 2000) and still > no go. I even remove the SSL 443 and 563 tunnel port from the registry > but again the same result. This is starting to become a real headache > and > ready to throw this product out!!! I cannot understand why Microsoft > develop a product that seems so simple to configure but difficult to > debug > (a typical Microsoft way). Any other suggestions, ideas???? Thank you. > > > ------------------------------------------------------ > You are currently subscribed to this ISAserver.org Discussion List as: > cismic@xxxxxxx > To unsubscribe send a blank email to $subst('Email.Unsub') ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: cismic@xxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')