RE: HELP
- From: "Pat Shalley" <PShalley@xxxxxxxxx>
- To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
- Date: Tue, 2 Oct 2001 07:56:29 +1200
Have you checked the MTU size of your external network card, I had a similar
problem, I created an entry in the registry to default the MTU size to 1400 and
I could then browse web pages.
-----Original Message-----
From: Aleksander França Honma [mailto:aleks@xxxxxxxxxxxxxx]
Sent: Tuesday, October 02, 2001 07:32
To: [ISAserver.org Discussion List]
Subject: [isalist] RE: HELP
http://www.ISAserver.org
That's not the problem... the masks are probably correct.
-----Original Message-----
From: Scott Rineer [mailto:srineer@xxxxxxxx]
Sent: segunda-feira, 1 de outubro de 2001 16:38
To: [ISAserver.org Discussion List]
Subject: [isalist] RE: HELP
http://www.ISAserver.org
Question: one of my sysop guys ask if it matters that the sub net mask on the
out side is 255.255.255.224 and the internal is 255.255.255.0 (which is correct
for there respected sub nets)?
-----Original Message-----
From: Aleksander Franca Honma [mailto:aleks@xxxxxxxxxxxxxx]
Sent: Monday, October 01, 2001 12:09 PM
To: [ISAserver.org Discussion List]
Subject: [isalist] RE: HELP
http://www.ISAserver.org
Do you a Packet filter for HTTP?
Have you tried to create a rule to leave your packet filter wide open at least
to test this?
-----Original Message-----
From: Scott Rineer [mailto:srineer@xxxxxxxx]
Sent: segunda-feira, 1 de outubro de 2001 16:00
To: [ISAserver.org Discussion List]
Subject: [isalist] RE: HELP
http://www.ISAserver.org
DNS is Resolving ok, but...
Internally I can Ping the IP address --Works ...No WEB
Externally I Ping the IP address, not response and No WEB
Externally I ping the FQDN, It resolves but no response.
-----Original Message-----
From: Aleksander Franca Honma [mailto:aleks@xxxxxxxxxxxxxx]
Sent: Monday, October 01, 2001 11:44 AM
To: [ISAserver.org Discussion List]
Subject: [isalist] RE: HELP
http://www.ISAserver.org
I'm assuming that Internet people are resolving the name to the new IP address.
Now, are the Destination Sets OK?
What error do you get?
I mean does IIS retrieves any page or error?
-----Original Message-----
From: Scott Rineer [mailto:srineer@xxxxxxxx]
Sent: segunda-feira, 1 de outubro de 2001 15:50
To: [ISAserver.org Discussion List]
Subject: [isalist] RE: HELP
http://www.ISAserver.org
Done, But Not still not working
-----Original Message-----
From: Aleksander Franca Honma [mailto:aleks@xxxxxxxxxxxxxx]
Sent: Monday, October 01, 2001 11:33 AM
To: [ISAserver.org Discussion List]
Subject: [isalist] RE: HELP
http://www.ISAserver.org
Have you checked on which IP ISA is listening port 80 INCOMING REQUESTS?
-----Original Message-----
From: Scott Rineer [mailto:srineer@xxxxxxxx]
Sent: segunda-feira, 1 de outubro de 2001 15:40
To: [ISAserver.org Discussion List]
Subject: [isalist] HELP
http://www.ISAserver.org
We Just Changed ISP this weekend. (Thus changing External IP addresses.) I
have server Web servers and an Email server behind the firewall.
Currently:
Mail Works (both Directions - is Published)
Web Surfing Works for All Users.
But, I am Not Able to Publish my Web Sites. ( we are in Panic Mode.)
Please Help.
Scott Rineer, M.C.P.
Network Administrator
CARF
4891 East Grant Road
Tucson Az 85712
520-325-1044 X 179
520-906-0252 Cell
srineer@xxxxxxxx
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
Aleks@xxxxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
srineer@xxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
Aleks@xxxxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
srineer@xxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
Aleks@xxxxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
srineer@xxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
Aleks@xxxxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
pshalley@xxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
Disclaimer: This mail was content checked for malicious code or viruses by
Mail essentials. Mail essentials for Exchange/SMTP is an email security,
content checking & anti-virus gateway that removes all types of email-borne
threats before they can affect email users. For more information please visit
www.gfi.com
Other related posts:
