In my setup I use back to back with the DMZ in the middle. I keep a DNS server in the DMZ that contains all public IP addresses. You can have multiple public domains listed on that DNS machine. Domain1.com WWW 198.0.0.10 (sample public NIC) FTP 198.0.0.10 (sample public NIC) SQL 198.0.0.10 (sample public NIC) Domain2.com WWW 198.0.0.10 (sample public NIC) When you setup destination sets you would have a destination Set for both domains going to each domain. And web publishing going to both domains. And, by selecting The include original header you can actually Setup your web server to use host headers and you should be able To have multiple websites running using only 1 IP address. The above is only the real short explination. Search the news groups at http://www.isaserver.org for additional Information with "HOST HEADERS", "DNS AND ISA" as key words. Joseph -----Original Message----- From: Mike Carlson [mailto:domitianx@xxxxxxxxxxxxx] Sent: Wednesday, January 23, 2002 3:09 PM To: [ISAserver.org Discussion List] Subject: [isalist] Foreign Domain http://www.ISAserver.org Can I host a foreign domain behind ISA? My internal AD is domain1.com and I want to host a website for domain2.com. I have ISA Standard not enterprise installed so there should be no integration with AD at all. Do I have to configure something in the LAT or LDT? All the sites I host works fine that are using the same domain like bob.domain1.com and joe.domain1.com work fine. I am having a problem with www.domain2.com I have the host header on the WWW box set to use that domain name for the site. I created a destination set of www.domain2.com which points to the IP of the WWW server. I created a web publishing rule to forward any requests to that same IP using the original host header. Thanks, ******************** Mike Carlson http://www.domitianx.com domitianx@xxxxxxxxxxxxx ******************** ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: cismic@xxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')