When using the SecureNAT ... you have to set rules for the IP not the user.
Make sure you have a rule that lets the traffic thru for that SecureNAT's
IP...
Irving
----Original Message Follows---- From: "Chhatwal, Raminder S." <RChhatwal@xxxxxxxxxxxxxxxxx> Reply-To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx> Subject: [isalist] Fiewall Log sc-status: 13301 Date: Thu, 6 Dec 2001 13:37:15 -0500
http://www.ISAserver.org
Hi all,
Following is what my firewall log shows. I have a protocol defined with port 8101 inbound and outbound and a protocol rule allowing this protocol to go through but I am still getting blocked.
Please advise what further configuration needs to be done to let SNAT clients go through the firewall to connect on this port.
Thanks Rami
#Software: Microsoft(R) Internet Security and Acceleration Server 2000 #Version: 1.0 #Date: 2001-12-06 18:27:08 #Fields: c-ip cs-username c-agent date time s-computername r-host r-ip r-port time-taken cs-bytes sc-bytes cs-protocol cs-transports-operation sc-status sessionid connectionid
10.22.25.60 - - 2001-12-06 18:27:08 NYNY0S24 - 10.11.0.221 8101 - - - 8101 TCP Connect 13301 2 1
_________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp