Hello, Thanks For help. My clients must use External IP. Because My DNS server internaly and Remote office connect VPN over Internet. Example Publish MMS server doesn't work internaly. -----Original Message----- From: Jackly928 [mailto:jackly928@xxxxxxxxxxx] Sent: Monday, October 21, 2002 12:55 PM To: DOGAN@xxxxxxxxxxxxx Subject: Re: [isalist] Publish FTP,MMS,SMTP on internal Network Fail Hello.Friend. If you want to check it, your client must be a extend network's machine. if you want to test in your inside network, you must use telnet 10.0.0.5 25 Hope it can help you. Best wishes, ----- Original Message ----- From: DOGAN <mailto:DOGAN@xxxxxxxxxxxxx> ÇOBANYILDIZI To: [ISAserver.org <mailto:isalist@xxxxxxxxxxxxx> Discussion List] Sent: Monday, October 21, 2002 4:17 PM Subject: [isalist] Publish FTP,MMS,SMTP on internal Network Fail http://www.ISAserver.org <http://www.ISAserver.org> Hello All, First I'm sory My English.. I have a Problem. I want Publish FTP,MMS and SMTP server on internal Network but fail this condition. I publish this server External Network no problem. ISA Server 10.0.0.1 200.200.200.1 200.200.200.2 - SMTP (10.0.0.5) 200.200.200.3 - FTP (10.0.0.10) 200.200.200.4 - HTTP, MMS (10.0.0.10) Client (10.0.0.100) can't connect 200.200.200.2 SMTP server or Telnet 200.200.200.2 25 can't connect. But Same client can Connect Only HTTP. What is the Problem? Thanks ALL... ------------------------------------------------------ List Archives: http://www.webelists.com/cgi/lyris.pl?enter=isalist ISA Server Newsletter: http://www.isaserver.org/pages/newsletter.asp ISA Server FAQ: http://www.isaserver.org/pages/larticle.asp?type=FAQ ------------------------------------------------------ Exchange Server Resource Site: http://www.msexchange.org/ Windows Security Resource Site: http://www.windowsecurity.com/ Windows 2000/NT Fax Solutions: http://www.ntfaxfaq.com ------------------------------------------------------ You are currently subscribed to this ISAserver.org Discussion List as: jackly928@xxxxxxxxxxx To unsubscribe send a blank email to $subst('Email.Unsub')