Hi, We have a setup of two ISA 2004 servers for Internet access. The traffic is routed through the one which is configured in internal network. It will allow the autehnticated users and forward the request to upstream ISA2004 server, which is in Internet DMZ. This will serve the request. We have some issue with FTP sites. Whenever we access FTP sites through this setup, it opens only in read-only mode. We even unchecked the FTP read-only filter in all rules in both ISA2004 servers. Could someone help in this issue? Regards, Aswath **************** CAUTION - Disclaimer ***************** This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message. Further, you are not to copy, disclose, or distribute this e-mail or its contents to any other person and any such actions are unlawful. This e-mail may contain viruses. Infosys has taken every reasonable precaution to minimize this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should carry out your own virus checks before opening the e-mail or attachment. Infosys reserves the right to monitor and review the content of all messages sent to or from this e-mail address. Messages sent to or from this e-mail address may be stored on the Infosys e-mail system. ***INFOSYS******** End of Disclaimer ********INFOSYS***